Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Coring DVD

Posts

Coring DVD

#1

Coring DVD

robo hippy

My sales on this DVD dropped to pretty much nothing, so I am putting it up on You Tube. Thanks to all who supported it.

http://www.youtube.com/watch?v=xk-Z-scS84w

robo hippy

Re: Coring DVD

#2

Re: Coring DVD

Sergio

Nice video indeed. i have only one problem with it, which is the problem I'm having with the McNaughton coring system: there is too little information on how to determine the angle of the cutter.

Re: Coring DVD

#3

Re: Coring DVD

robo hippy

The bevel angle is around 70 degrees, which is common with scrapers. As for the sides of the cutter, if you keep the spear point, which I don't, they are about 45 degrees or so, or the 2 together make a 90 degree corner. Does that answer the question?

robo hippy

Re: Coring DVD

#4

Thanks

Steve Mushinski

Robo,

Enjoyed your video and just wanted to thank you for posting.

Loved the out takes!

Steve

Re: Coring DVD

#5

Steven Antonucci

Lots of good "extras" in there!


Re: Coring DVD

#6

Re: Coring DVD

Sergio

Thanks, but my problem is with the angle of entry of the tool, in other words the angle made by the handle and the face of the bowl.

Re: Coring DVD

#7

Re: Coring DVD

Dale Bonertz

Sergio,

I did a demonstration on the McNaughton for our club in which they put up on youtube. Type in McNaughton Center Saver and it will come up under Rocky Mountain Woodturners or Dale Bonertz does a demonstration. I cover how to help you site the tool for angle of entry. I hope this isn't stealing Robo's thunder.

On a separate note to Robo. This video is much different than I remember the original video. Did you do significant editing? You no longer mention bending the tips of the blades in this one or I missed it.

Re: Coring DVD

#8

Re: Coring DVD

robo hippy

Dale, this is the original. I didn't put the part in about bending the tips in a hair. That was some thing I discovered later. It always bothered me that the blades would always drift to the outside of the cut. The very last little bit of the blade pointing in a straight line seemed to be the answer. I can usually figure things out if I have enough time.

Sergio, Well, that angle thing is some thing that you have to figure out, and most of the time it is trial and error. Dale's video is good, and he uses a slightly different approach. The angle of the handle changes as you go in as the handle and tool move through an arc as you core. This changes a lot depending on the size and shape of what you are coring, and which blade you are using. The most simple answer I have come up with is that you want the tip of the blade pointing/aiming just slightly outside the center of the bowl bottom. This will usually get you there with a bit more thickness than you would want for a perfect Mike Mahoney 10 cores out of a tiny blank type of core. Safe. Do start with smaller blanks, maybe 10 to 12 inch diameter and 4 or 5 inches thick, and green wood. Repeat many times.....

robo hippy

Re: Coring DVD

#9

Re: Coring DVD

Sergio

Thank you. The pointing to the left of center was in my mind.

Re: Coring DVD

#10

Re: Coring DVD

barbara dill

I enjoyed the video and learned a lot. Thanks. I, too, was frustrated with understanding the angles but loved the results. The images I've posted show the way I found to know the angle of the tip and therefore, the handle. I wrote a paper that I'd be glad to share if anyone is interested.

Re: Coring DVD

#11

Re: Coring DVD

Don in Central Illinois

I would love to have a copy of you paper. I judt bought one a few weeks sgo but havdn't had time to try it yet.

Re: Coring DVD

#14

Thanks for the Link Barbara!!!


Re: Coring DVD

#15

Re: Thanks for the Link Barbara!!! NM

:)