Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Price for a used lathe

Posts

Price for a used lathe

#1

Price for a used lathe

Jim Canning

I have a Powermatic 3520B lathe that is about 8 years old that I am thinking of selling and I need to find out what a fair asking price would be, it is in very good condition. Thanks in advance.

Jim

Re: Price for a used lathe

#2

Re: Price for a used lathe

Ralph Lindberg

Generally I look to sell used tools at about the 50% mark on list-price.

Re: Price for a used lathe

#3

Steven Antonucci

My two cents: does a lathe depreciate?

steven antonucci

Is there some kind of amortization schedule for a lathe? High end lathes should last for tens of years, even under the most strenuous conditions of production turning?

Most of what you see is really not a wear part? Bearing may need to be replaced, and electronics fail. If you've got a million miles on them, I would say that would be the only reason to make the price lower than the current list price. A 3520B has rapidly increased in price over the past 8 years, and you could probably get 75% of the cost of a new one without a second thought? Don't forget that they probably cost another $400 shipped.

S

Re: Price for a used lathe

#4

Rob Wallace

Re: Price for a used lathe

Rob Wallace

Jim:

I asked essentially the same question about 4 days ago ( http://www.woodcentral.com/woodworking/forum/turning.pl/md/read/id/473757/sbj/fair-price-for-used-jet-1642-1-5-hp-lathe/ ) for a Jet 1642 - 1.5 Hp lathe of about the same age (8 years).

The consensus is that you should ask between 50 and 70% of the new price and you'll be in the ballpark for a fair price. Some of this variation will be based on the local market and how in-demand the lathe is for woodturners (the PM 3520 is a well-liked lathe and would be considered "in-demand", especially for those that would like to upgrade to a larger machine) so you might ask around locally as well. I'd also suggest your asking price be on the upper end of the range with some built-in flexibility for negotiations....

Good luck selling the lathe - if it's ion good shape I am sure there are buyers waiting to jump onto this machine (.....almost literally!)

Rob

Re: Price for a used lathe

#5

Brad Vietje

Re: My two cents: does a lathe depreciate?

Brad Vietje

I would tend to agree -- as long as its new enough that it has the steel, and not the cast iron "hockey puck" locking the headstock to the bed, and has the beveled headstock design & digital readout.

Mine must be about 8 years old, too. I got it on sale for somewhere around $2795 (list was $3250 or so at the time ???), and I would think 75% of that price would be fair. I suspect 75% of the current list would be too high to get many offers, even if still a fair price in theory.

These are real nice machines, so I would shoot for a good deal more than 50% unless its pretty beat up.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Price for a used lathe

#6

Re: My two cents: does a lathe depreciate?

Ralph Lindberg

We all need to recall, what you can ask for is not always what you will get.

Regionally (Seattle) we have a company called Equipment Sales and Surplus. They are (literally) just across the road from the company that runs PowerMatic/Jet tools.

They are both a dealer, and the authorized outlet for return/freight damaged/etc PM/Jet tools and the prices on these like-new/refurbished tools is very good. We had to wait 5 months to get a Jet 1220VS, but then we got a refurbished unit, with full warranty for about 60% of list.

I don't know what the wait on a 3520B would be, other then long. But the price would be such that no patient buyer is going to buy a used lathe for the kind of prices you are thinking about.

PS, every time I have been there they had refurbished 1014s in stock. A friend once bought 5 in a single stop.

Re: Price for a used lathe

#7

New=5 yr warranty . Does that count?


Re: Price for a used lathe

#8

Steven Antonucci

A new one is $4000 on Amazon

steven antonucci

I don't know if they will ship it for free, but assuming that Jim wouldn't, he'd be competing with that as a starting point. No idea where Jim lives, but if you look at the cost of new+ the cost of shipping, I'd bet you are looking at $4500 all-in.

If someone offered me 50% of that, I'd probably let them spend the extra $2200 on the new one? Even if Jim only paid $3000 for his, you cannot get them for that anymore... so $3000-3500 picked up seems about right to me?

If Jim is one of those "lathe polishing guys", toward the higher side. I am not, so my lathe looks "used"...even though it is mechanically perfect.

If you don't get it from Amazon, good luck finding it for $4K.

Steve

Re: Price for a used lathe

#9

$4k most everywhere

jeff Willaford

Rockler, Craft Supplies, Packard (free shipping) all have the PM 3520B for $3999.99 2hp

Re: Price for a used lathe

#10

Re: Price for a used lathe

steve worcester

The price is what you want to let it go for, how long you want to wait, what the price for the same model is new (which reduces if that isn't a current model) and how bad someone wants it.

Essentially, how quickly you wan to sell it and how bad does that individual want it.

70% of new is a good starting point for that age. Figure if it dies tomorrow, what it would cost to replace the VFD or the motor, that is the lottery ticket both of you are betting on. Since the bearings are a predictable item in the equation, the rest of it is how well you maintained it.

Re: Price for a used lathe

#11

Buy Low, Sell High

Philip Morris

Jim,

I agree with others that have advised to price according to current list price. I have typically sold used lathes for around 75% of new list as indicated below.

Oneway 1640; Bought for $3000; Sold for $3500 (retail at time of sale $4500)

Jet 1642; Bought for $1385; Sold for $1450 (retail at time of sale $2000)

Delta 46-460; Bought for $525; Sold for $510 (retail at time of sale $699)

Hope this helps,

Philip