Wireless PA system?
Mike Foster
Hi all. Our little club is considering investing in a wireless PA system. Does anyone have a suggestion on what works and doesn't cost an arm and a leg?
Knowledge You Can Build On — Est. 1998
Wireless PA system?
Mike Foster
Hi all. Our little club is considering investing in a wireless PA system. Does anyone have a suggestion on what works and doesn't cost an arm and a leg?
The thing Alan Zenreich uses works well
steven antonucci
I'll page him...
Re: The thing Alan Zenreich uses works well
Lyle Jamieson
After a couple cobbled up systems with used parts that were not very compatible, trouble, trouble, trouble, my club went to Radio Shack and got a little system that works great for our small club of <50 people, Happy, Happy, Happy:-)
Re: Wireless PA system?
Alan Zenreich
Mike, there are lots of options. I will be happy to discuss this with you. Let's set aside some time to talk on the phone.
Alan, this info will be beneficial ......
JamieDonaldson
...to many others who are also in a quandry, so post it here for all to see.
Re: Alan, this info will be beneficial ......
Alan Zenreich
Jamie, I will likely write an article or do a video... There's a lot to cover.
On the other hand, back in June, I posted a complete system in the classified section, and the silence was deafening.
Re: PA as in PA
Sergio
PA as in Pennsylvania? Too many acronyms for me.
Re: Alan, this info will be beneficial ......
Bill Blasic
Alan,
Not total silence as I inquired but could not get my club to go along as they thought it too expensive for what we do.
Bill
Re: PA as in PA
bernard feinerman
"PA" in this context means Public Address system - microphone plus amplifier plus speakers.
Bernie
Re: Alan, this info will be beneficial ......
Alan Zenreich
Bill, correct...you were the lone cricket
Re: Alan, this info will be beneficial ......
Alan Zenreich
Bill,
So what, if any, system did your group acquire?
Thanks to Alan
Mike Foster
I spoke with Alan for quite a while regarding PA systems. He has a wealth of good information and some really great ideas regarding safety at the lathe relating to doing demos. This information is really too extensive to post here and really begs an article in one of the journals. I believe that Alan is contemplating this and I think it is a great idea. I did come up with a couple of suggestions for our club, but will need to talk it over with the other officers before we pull the plug on it.
I'll vote for it, Mike!
Re: Wireless PA system? *LINK*
Rich Egan
You might start with something like this from Anchor. We have had good luck with their products. If you have a smaller space, almost any small powered speaker would work, and you can add a wireless mic from ATI for $200 or so.
http://http://www.bhphotovideo.com/c/product/1002689-REG/anchor_audio_gg_cu1_go_getter_ac_dc_powered.html
Re: Alan, this info will be beneficial ......
Bill Blasic
Alan,
As it turns out we had one stowed away in the back of our cupboard. I have it sitting here in the computer room so when I have time I can check it out and see how it works.
Bill
Re: Alan, this info will be beneficial ......
Alan Zenreich
One of the clubs I belong to brought out a PA system that had been stashed away somewhere (I had never seen it before). The sound wasn't very good, and I suspected that it was the lavalier microphone supplied. So I donated a head worn microphone that connects to the transmitter... a big improvement.