Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Tai Chi and turning

Posts

Tai Chi and turning

#1

Tai Chi and turning

John Lucas

I was reading an article in Woodwork about Jeremy Kimchi. He does a lot of carving on his work and he made 2 statements that really chime with me. One was that when he's power carving he uses his body similar to the way he practices Tai Chi. He has a stable lower body that allows his upper body to move for a more free controlled flow of the tool. That sounds like exactly how I use my angle grinder with my arms tucked into my body and my body controlls the cut. That is also exactly how I turn. Then energy and direction of cut come from the solid base of my feet and then flow up through my legs and is controlled then by the movement of my upper body Arms and body become one.

The other statement he made is a masterful description of sanding. He sands carefully and relentlessly much like the way ancient waters created the nearby gorges. I really like the words carefully and relentlessly. Carefully so you have control of what and where your sanding. And relentlessly in that you sand as much as necessary to get the job done. There isn't any excuse to have visible sanding marks in our work. Sand carefully and relentlessly.

Re: Tai Chi and turning

#2

Ellis Walentine

I agree

Ellis Walentine

I've been studying Tai Chi for over a year now, and it has definitely helped with my awareness of the dynamics of energy and movement of my body. Good insights, John. What issue of Woodwork would that article have been in?

Ellis

Re: Tai Chi and turning

#3

Keith Tompkins

Re: Tai Chi and turning

Keith Tompkins

HI John, I agree completely....I don't understand why some turners hate to sand; it's part of the job, and poor sanding really can ruin an otherwise good piece. During a demo, someone was filming my FEET! I asked them why, and they replied how I used my whole body to turn. Until then, I never gave it much thought.

Re: Tai Chi and turning

#4

Re: Tai Chi and turning

robo hippy

I took up Tai Chi long after I started turning, maybe 8 or so years ago (turning 15 plus years ago). First day in the class, I said to myself, "hey, this is what I do when I am standing at the lathe". Posture, and breathing. We do not tend to think of breathing as important in turning but it is as huge as how you move. Oh yea, it was huge in me getting ready for my robo hips last January. I got through rehab in less than half the time that most others did. Part of that may just have been stubborness. One of the old David Ellsworth video tapes had him doing some similar stretching exercises and movements. Easier than Yoga for me.

robo hippy

Re: Tai Chi and turning

#5

Winter 2013-2014


Re: Tai Chi and turning

#6

Ellis Walentine

Thx


Re: Tai Chi and turning

#7

Re: Tai Chi and turning

steve worcester

That's interesting, as I have been taught by some Masters (Ellsworth and Trent Bosch) and it is a whole body movement. I also took Kung Fu by a 6th degree black belt that taught Tai Chi as well.

It is whole body movement and awareness of where the other parts were in relationship to the cut.

I will give some props to Stuart Batty (also as a martial arts student and boxer) in that you have to be aware of the bodies weight is entering and exiting the cut. You don't want to be off guard to where the bodies weight is.

If you are doing a cut and you are out of weight with your body, any disruptions in the cut throw off where it is intended to go.

I teach my woodturning students that it is very much like Tai Chi (which I also describe as slow motion Kung Fu) in that you have to have your weight balanced between feet while you cut. But most students initially are so focused in completing the cut they don't think about breathing or the balance entering or exiting the cut.

Good subject to talk about.

Re: Tai Chi and turning

#8

Brad Vietje

Ellsworth's "Flexion Section"