Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Don't believe I could do this on my mini lathe *LINK*

Posts

Don't believe I could do this on my mini lathe *LINK*

#1

Don't believe I could do this on my mini lathe  *LINK*


http://www.youtube.com/watch?v=ZNHVeCUQxeY

Re: Don't believe I could do this on my mini lathe *LINK*

#2

Steven Antonucci

The cole jaws must be massive!


Re: Don't believe I could do this on my mini lathe *LINK*

#3

I could handle that on my locomotive lathe.

Keith Newton

Mine is certainly heavier duty that what he had there, but what is the point? did someone buy it? It was hardly a thing of beauty.

Re: Don't believe I could do this on my mini lathe *LINK*

#4

Re: Don't believe I could do this on my mini lathe

ihmserv

That's one way to make a hot tub.

IAN

Re: Don't believe I could do this on my mini lathe *LINK*

#5

Like climbing a mountain...

Don Orr

...because you can, or to see if you can.

Gimmick? Just for the fun of it? Personal challenge? Set a world record? Someone told him he couldn't?

Anybody know what happened to the bowl?

Re: Don't believe I could do this on my mini lathe *LINK*

#6

I so want to do one of these

Terry Scott

On my bucket list

Re: Don't believe I could do this on my mini lathe *LINK*

#7

Ellis Walentine

I helped turn that bowl

Ellis Walentine

That was at our American Woodworker Show in Ontario, California. The tool we used was a 7'-long ring tool, about 1 1/4" in diameter with a limiter over the nose to keep it from catching. A catch would have thrown Stuart right through the roof of the exhibition hall. The big fellow working with Stuart on the bowl in that video was Steve Blenk, a dear friend and contributing editor to our magazine who was killed in a head-on truck crash about ten years ago.

The bowl blank weighed 5,600 lbs and took two Hysters to get it off the flatbed. We bought the log -- Sitka spruce, 8' in diameter -- from a logger in Gold Beach, Oregon and had it shipped to PA for this stunt. The bowl in progress traveled to our three shows that year, and was finished at the final show. At the time, it held the record for the biggest turned bowl in the world.

Fond memories for sure. Thanks for finding this video.

Ellis

Re: Don't believe I could do this on my mini lathe *LINK*

#8

Ellis Walentine

The bowl

Ellis Walentine

... still lives. I believe it is now the property of American Woodworker again, but I'm not too sure about that. At the time, it was accepted into the Guiness Book of Records as the world's largest turned wooden bowl, at 7'- 9 3/4" in diameter and about 3 1/2' high. I have a copy of the Guiness certificate around here somewhere but I can't lay my hands on it at the moment.

Here's a shot of the finished bowl in 2002. It toured with the Woodworks Shows for several years after it was completed in 1998. In this photo, you see Andy Rae, me, Stuart Mortimer, Frank Klausz and Steve Shanesy.

Good fun. What an experience.

Ellis


Re: Don't believe I could do this on my mini lathe *LINK*

#9

Ric Taylor

I'm confused

Ric Taylor

The bowl in the pic is a natural edge bowl, but the bowl in the video is not. They appear to be different bowls.

Re: Don't believe I could do this on my mini lathe *LINK*

#10

Ellis Walentine

You're right

Ellis Walentine

Oops! Good catch.

That bowl was turned in 1998, the year after the big natural-edged bowl. Here are a few shots of both of the bowls in process. Forgive the quality.

The record setting bowl:





And the later bowl:





Re: Don't believe I could do this on my mini lathe *LINK*

#11

Thanks for the pics and info!