Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

OT) Metal clay, print your own hardware. *LINK*

Posts

OT) Metal clay, print your own hardware. *LINK*

#1

Leo Cuellar

OT) Metal clay, print your own hardware. *LINK*

Leo Cuellar

This Indiegogo project may be of interest to those of you that like to add metallic elements to your work.

Personally, I signed up for the software files. I figure by the time this project ships, I should be able to build one with the help of the 3d printer I'm still waiting on. :D

I am not affiliated with this project. I have no interest other than I'd like to see it succeed because it is pretty nifty.


Mini-metal maker

Re: OT) Metal clay, print your own hardware. *LINK*

#2

Re: OT) Metal clay, print your own hardware.

Don Evans

That's cool Leo. Good luck with the projects. I've had my eye on the clay for long time for making things for turnings and carvings but the lack of and cost of a good kiln has stopped my so far. I could use one at NC States Craft Center but just never got to it yet.

You should check out Rio Grande a jewelry supply, I use them for lot of stuff. They sell along with many other things the clay.

Don

Re: OT) Metal clay, print your own hardware. *LINK*

#3

Leo Cuellar

Re: OT) Metal clay, print your own hardware. *LINK*

Leo Cuellar

I've had my eye on the clay for a while now too, Don. But hadn't gotten into it yet for the same reasons. I think the release of this one is about 10 months away. He just added more information to his page today.

I plan to do some lost "wax" casting with models printed with PLA plastic from the first printer, but need to get a good crucible. Rio Grande is one of the suppliers I was looking at.

Here's a link for a simple kiln. I haven't tried this yet as I can never remember to get plaster of paris when I'm in town. :\ I would probably use a couple of coffee cans for this.


Soup can kiln

Re: OT) Metal clay, print your own hardware. *LINK*

#4

Alan Zenreich

Re: OT) Metal clay, print your own hardware.

Alan Zenreich

Lauren has been using silver PMC for more than a dozen years. She likes combining various media... For example enameling on top of the fired PMC. She fires it in the heat treating furnace I originally bought for knifemaking.

Re: OT) Metal clay, print your own hardware. *LINK*

#5

Re: OT) Metal clay, print your own hardware.

Don Evans

That's pretty good small kiln. I wonder about the sand he showed. I've never seen any that brown. Wonder if the type of sand is important, I would think NOt.

I've seen black sand never chocolate brown, anyone?

Don

Re: OT) Metal clay, print your own hardware. *LINK*

#6

Leo Cuellar

Depends on the type of rock,

Leo Cuellar

Don, as to what color the sand is. I've seen several different colors sold: white, green, grey, even red(ish) as well as black & brown. I don't think it matters too much what type it is.