Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Wood Gloat -- Part 1

Posts

Wood Gloat -- Part 1

#1

Brad Vietje

Wood Gloat -- Part 1

Brad Vietje

Last Friday I discovered a few Boxelder trees had been cut, and the stumps were still there -- and covered in burls. I knew the landowner, and asked what was to become of the stumps, and she said a fellow had taken most of the wood for firewood, but that he might let me take the stumps for turning wood... But I'd better hurry, as he was coming back with an excavator and bulldozer to clean up the site -- maybe the next day.

As it happens, I was planning to be back in the area the next day for a turning club meeting, so I made a few calls, and got permission to take as much of the remaining wood as I wanted. I called Mike Foster to see if he'd like to come harvest some great wood, and we met there the next morning.

The guy hauling the wood turned out to be very nice, and is planning to come down this coming weekend with an excavator, so he wanted to know how I'd like them to be handled so they don't get damaged -- wow! The plan is for him to dig up the stumps and place them on my trailer. Not only that, but he lives just a few miles from me, and says he has a number of logs at his house with "them bumpy warts on 'em", and I can go get those, too! Now, that's a nice fella deserving of a nice turning to reward him for his generosity!

Here's Mike cutting into the smaller stump...


...and here's a view of the chunk I brought home, with our new puppy, Homer:


Almost solid burl, with good figure, but not much red streaking:


Next weekend should be even more fun -- and I can't wait to see the logs he has at home, too!

Safe spinning,

Brad Vietje

Newbury, VT

Re: Wood Gloat -- Part 1

#2

Steven Antonucci

a day late and a dollar short (me)...

Steven Antonucci

I would have spent another hour to get that...and the gas money to haul it back to NJ!

Re: Wood Gloat -- Part 1

#3

Re: Wood Gloat -- Part 1

Jeff Rich

That is really cool!

I live across the street from an excavator.

He does not have the wood pile like he did a few years ago but always provides Cheri and I with some interesting finds.

Re: Wood Gloat -- Part 1

#4

Brad Vietje

Re: Wood Gloat -- Part 1

Brad Vietje

Forgot to mention.... the excavator's job is to clean up the lot for some project being built. He was going to dig these up and put them on a burn pile. And I've been eying these trees for about 10 years. Whew -- close call!

Safe spinning,

Brad Vietje

Newbury, VT

Re: Wood Gloat -- Part 1

#5

Re: Wood Gloat -- Part 1

George Guadiane

WOW, just WOW

i love to turn black locust burl, but box elder burl is my absolute favorite

Congratulations on a MAGNIFICENT gloat

Re: Wood Gloat -- Part 1

#6

Wood Gloatx2

Mike Foster

You can imagine my delight when I got a call from Brad inviting me to the party harvesting this burled tree. There is still a bunch of burl left in the ground and I think Brad will score big time once that is dug up. I came away with enough to keep me happy for a long time.

Funny thing is that I got a call from a friend who is a logger/forester and he had a friend that just took down a cherry tree with a big burl on it and wanted to know if he knew of anyone who could use it. I raised my hand pretty quickly. Sounds like I'll be harvesting a cherry burl on Fri. (no pics of it yet)

Re: Wood Gloat -- Part 1

#7

Nice!!!


Re: Wood Gloat -- Part 1

#8

Hope it is truly a burl, not canker.

Keith Newton

I get lots of leads for burls that turn out to be canker, and cherry is really prone to it. And the little burl that I have seen, hasn't been much more than just a big bump, without the little bud knots or other quickly changing grain patterns that make burls interesting.

Good luck though, you are obviously on the front of the wave, so hope you can rid it.

Re: Wood Gloat -- Part 1

#9

Brad Vietje

Re: Hope it is truly a burl, not canker.

Brad Vietje

I hear ya, Keith... we have oodles of Spruce trees with some very impressive bumps on them, but they're little more than a baked potato on a stick -- the figure is almost microscopic, and not all that exciting. Technically, those are "galls", not true dormant bud burls. There are quite a few Black Cherry burls in my area, too, which are different than the "black knot" that infects many Cherry trees.

These are the real deal. I'll post a photo of a turned piece if I can get some time to play. Hope you have better luck finding good burls soon!

Safe spinning,

Brad Vietje

Newbury, VT

Re: Wood Gloat -- Part 1

#10

Keith Tompkins

Re: Wood Gloat -- Part 1

Keith Tompkins

Hi Brad, Sounds like a collaborative between you and Mr. Foster is in order!

Re: Wood Gloat -- Part 1

#11

Re: Hope it is truly a burl, not canker.

Mike Foster

Well I went over to take a look this morning. The tree was quite a large cherry for what we see around here. Probably 4 ft diam. at the base. The "burl" was quite a large bump on the log near the base, but one glance at it and I was pretty sure that you were right Keith. The guy was kind of a yuk, looking to make thousands of dollars off this tree. I told him that the burl had to come off the tree for me to look at it before I ventured any offer. Well he had no inclination to cut it off, so I did. While cutting, I could feel it hit rot near the center and I knew it was not a good sign. I got it off the tree and there was not a bit of burl figure. It did have a bit of nice varigation and perhaps a bit of curl once turned. I wasn't biting though. I offered him 20$ and I think he took offense to this. He countered 50$ but I couldn't see it was worth it. The log it came from would certainly be a beauty in the hands of a sawyer who could handle it, but those are pretty sparse around here. I may go back to get a section of the main log if he decides to buck it up. If I was a bowl turner, that log would be to drool over, but I don't have the time or energy to deal with it.