Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Mineral oil at $1.50 a pint

Posts

Mineral oil at $1.50 a pint

#1

Aage Rendalen

Mineral oil at $1.50 a pint

Aage Rendalen

When my wife bought a bowl mill bowl some years before I started turning, it was recommended we use mineral oil to keep the wood saturated. Later on I never used it on any of my own bowls.

Until a month ago. In October the Richmond club had a Tome Lowe, a local bowl carver do a demo for the club. He only uses mineral oil and he had found a surprisingly cheap source: Walmart! Walmart sells mineral oil by the pint for $1.50 in the pharmacy section (it's sold as laxative). I promptly bought half a dozen bottles and have been using it to spiff up a bunch of bowls awaiting some up-coming craft shows. So far the stuff looks wonderful, and hopefully the bowls will be all dry by the time the shows come around. Right now the bowls have a nice, totally food-safe sheen, and if this goes well, I'll switch to mineral oil for good.

Unless some of you know something I don't.

Re: Mineral oil at $1.50 a pint

#2

Re: Mineral oil at $1.50 a pint

Sean Troy

Mineral oil does not dry. You need to wipe all excess oil from the wood.

Re: Mineral oil at $1.50 a pint

#3

I last paid $12 for a gallon of.......

JamieDonaldson

...mineral oil from my vet, who buys it by the drum. It is used frequently for treating horse and cattle colic, an intestional lubricant, and is quite safe for similar human consumption! :D

Re: Mineral oil at $1.50 a pint

#4

Re: I last paid $12 for a gallon of.......

Dale Gillaspy

I just don't like it because it is a petroleum product.

Re: Mineral oil at $1.50 a pint

#5

Steven Antonucci

I melt beeswax into my mineral oil

steven antonucci

probably a 50/50 split? Makes about the consistency of past wax, which I slather on a couple of coats as a finish, and then buff out to a soft sheen.

Use a microwave and pulse it on for 30 seconds or so at a time. Mine is sitting in a deli store container, and put the wax and oil together before microwaving. A simple Popsicle stick to stir, and let cool.

Steve

Re: Mineral oil at $1.50 a pint

#6

Re: I melt beeswax into my mineral oil

ron bauer

I make a product that is used on all my pieces and that I sell at the craft fairs for people to use in refreshing their wood items. The mix is equal parts beeswax and carnauba wax (which gives a little harder finish). This blend is then mixed at a ratio of at least 4 oil to 1 wax. If you want it a little loose you could go to 5 oil to 1 wax. I prefer it a little loose myself. All measures for my mix are by weight. I should note that if you are using straight beeswax you need to reduce the oil to somewhat less, say 2.5 or 3 oil to one wax. The carnauba makes the mix act different than the straight beeswax. All products are absolutely food safe. This is just my experience. If you don't like the consistency it is a simple matter to add wax or oil. Keep careful track of the weights so once you get it right you can go back to it. I melt in a double boiler. Ron.

Re: Mineral oil at $1.50 a pint

#7

Dick Hines

Re: Mineral oil at $1.50 a pint

Dick Hines

I bet you some strange looks. I can hear them not,"that guy has some real problems."

Re: Mineral oil at $1.50 a pint

#8

Re: Mineral oil at $1.50 a pint

robo hippy

I quit using mineral oil years ago. Main reason is that it doesn't really do anything other than give wood a wet look for a little bit. It soaks in and then seems to vanish. What doesn't vanish leaves oil rings on what ever the bowl is sitting on. This is why I switched to walnut oil. It dries out, cures, and hardens, giving the wood some protection. Mineral oil and bees wax do not offer any real protection. I have been using the Doctor's Woodshop walnut oil products.

robo hippy

Re: Mineral oil at $1.50 a pint

#9

Re: Mineral oil at $1.50 a pint

Bill Jacksonville, NC

If want a food safe finish, mineral oil (laxative) an excellent choice. Should not use baby or industrial mineral oils. . Yes, it comes from petroleum process but is deemed safe for humans. No, it is not a drying oil.

Pure drying oils used by woodworkers, Linseed, Tung, and Walnut take a long time to polymerize, and need reapplication after use as does mineral oil. With these drying oils quality of the seed or nut very important. All of these drying oils can and do go rancid given right conditions. Mineral oil does not.

Not sure how many times have linked Jonathan Binzen’s, “Food-Safe Finishes article found in Fine Woodworking magazine article on line. He likes the mineral oil & bees wax mix best of all.

For you folks that believe every wood finish is safe after it dries show me a product listed by name in the CFR everyone likes to quote!

I use nothing but mineral oil for bowls folks want to eat out of, and provide a free bottle of $1.58 Walmart mineral oil. For my dust collector bowls prefer film finishes.