Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

North Carolina symposium

Posts

North Carolina symposium

#1

Keith Tompkins

North Carolina symposium

Keith Tompkins

After a short vacation, I'm home from the North Carolina Symposium. I met quite a few WC members, whom I won't name just in case I forget someone! Great show, and I met a lot of good people, and picked up a few new tools. I finally purchased a Best Wood Tools carving post, which was very much needed, a new roughing gouge, and a bit of wood. Thanks to all who came up and introduced themselves...I had a great time there!

Re: North Carolina symposium

#2

Re: North Carolina symposium

Steve Criscenzo

Keith

I attended several of your sessions at Greensboro and enjoyed them all. The session I found the most helpful was the one on “Design”. I have a much easier time with the technical elements of turning than I do with creating “Pleasing Design” (must be the engineer in me). I am on the road right now so I am unable to turn but I have taken your advice and started a sketch book to capture my design ideas.

Thanks for the insight.

Steve Criscenzo

Re: North Carolina symposium

#3

Keith Tompkins

Re: North Carolina symposium

Keith Tompkins

Thanks Steve! :)