Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

metal spinning

Posts

metal spinning

#1

metal spinning

John Lucas

Just got back from the Class at Marc Adams school. We had a great time. If you get a chance to take a class from Micheal Mocho do it. He's a good instructor and a lot of fun. This was just a 2 day class and you can see by the group photo how much we were able to do.

I had been interested in metal spinning for about 15 years and collected a fair amount of literature on it. Made my own tools and then took this class. It was great. They furnished the tools. comparing theirs to mine and using them I see some modifications and some new tools I want to make.

Mike explained the process very cleary and most everone was successful to some degree or another. Some blew up a few pieces but we all learned from the failures.

I look forward to seeing where I can take this medium.






Re: metal spinning

#2

Re: metal spinning

matt overton

Look like fun. I can't wait to see where your imagination goes with this!

Re: metal spinning

#3

Re: metal spinning

Hal Taylor

Thanks for the info and pics John. Looks like fun. Maybe when I master wood (ha!) I'll try it.

Re: metal spinning

#4

Re: metal spinning

Don Orr

Very nice! I'd love to take that class someday. Wish it was closer.

Re: metal spinning

#5

Alan Sweet

Re: metal spinning

Alan Sweet

Well, years ago, when I made furniture, boxes, cabinets, router thingies, , ... My lovely wife asked was I ever going to get a lathe. I used to go to the local WW guild and use their lathes to turn legs and decoration for furniture.

I said then, too much to learn, too much to spend and besides it creates a mess. Well, I have too much to learn about a million of other wood working things, my to do list will never be complete, I'm know we don't have the money, and I already have to much to clean each day.

Then about a year ago, I bought a midi lathe... sigh all my good intentions went out the garage door.

Well, when it comes to metal turning; there is too much to learn, too much to spend. I have too much to about a million and a half wood working things, my to do list is even longer, and where would I put the tools and machine.

If I ever get around to metal turning, I'll have to bu the house next door and turn it into a shop.

But, I bet you turn some really great stuff. I look forward to seeing your creations.

Re: metal spinning

#6

Spinning

Michael Mocho

Hey folks,

I can’t help but brag on my students who were courageous enough to take the metal spinning class I recently taught at the Marc Adams School in Indiana. I felt like we tried to cram too much into just two days, and they were all very gracious and adaptable to the less than ideal conditions, but every one spun several forms and no significant blood loss was noted.

I just got this photo from one of my students- Derak Plant- who said he got so inspired after the class that he made this miniature Stanley Cup for his friends. It is spun aluminum, and looks to be around 18” tall. Fantastic job Derak!!!

Thanks to everyone who took the class, and to the ever-hard-working Mark Hedin who assisted and helped make it all work out! Great school, great people- y’all should check it out!!!!

-Michael Mocho


Re: metal spinning

#7

Re: Spinning

John lucas

Cool. We did have a good time. In have a fun project planned but probably won't have time to try it until after thanksgiving.

Re: metal spinning

#8

Jim in Burlington Ont.

Re: Spinning

Jim in River Oaks, Ont.

You just took my breath away!

Take care,

Jim

Re: metal spinning

#9

Re: Spinning

Randy Gleckler

That is VERY cool, sounds like it would have been a very very fun class to be at.

Re: metal spinning

#10

Re: Spinning

Jim Breeden

Michael, Ever think about a metal spinning class here in ABQ with the NMWT's?

Re: metal spinning

#11

They obviously had a great instructor!

Don Orr

That's a very nice project. I wish I was closer to the school. Maybe you could do a class in the Northeast sometime. Brookfield Craft Center ?

Re: metal spinning

#12

Re: They obviously had a great instructor!

Michael Mocho

I would certainly be open to it- I taught at the Brookfield Craft Center many years ago, and both the people and the facility were wonderful. I know it's been a tough time for craft schools in this country, but glad to hear that Brookfield is still going.

Re: metal spinning

#13

Re: They obviously had a great instructor!

bernard feinerman

I think Brookfield recently closed their Woodturning shop

Re: metal spinning

#14

Re: They obviously had a great instructor!

Don Orr

They are in the process of getting things back up and running. Hopefully they will be able to get the turning shop open again soon. It was a wonderful shop-I have not taken classes there-yet. I was able to check it out once while in that area.

Re: metal spinning

#15

Keith Tompkins

Re: They obviously had a great instructor!

keith tompkins

Hi Don, Brookfield is attempting to reopen, but the entire turning shop's contents were auctioned off. I don't know how they will obtain the capitol required to restore the turning program. I have been affiliated with Brookfield for many years, and am deeply saddened by their dilemma.