Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Walnut bowl

Posts

Walnut bowl

#1

Walnut bowl

John Lucas

I was walking through the shop looking for wood to turn some more spheres and this bowl just yelled out at me. Seriously, it is a really odd shaped piece of wood a club member gave me years ago. Never knew what to do with it. The I just saw it and knew what it should be. Don't know if the wood talked to me but how else do you explain it.

I left the outer edges more or less the way they were. I gave them more angle and a slight curve. Then textured them. The top was flat so I left it that way just cleaned it up a little.

Finished with 4 coats of Minwax wipe on Poly that was steel wooled out then buffed with the bealle buffing system.

Re: Walnut bowl

#2

That's really nice, John...

GaryG in MD

I love the shape, and also the hole in the side.

Well done! ...GG

Re: Walnut bowl

#3

Alan Sweet

Nice,,

Alan Sweet

Curious question.

How did you turn the bottom?

Re: Walnut bowl

#4

Re: Nice,,

John lucas

Mounted between centers as always then turned the bottom with a tenon. Then turned the inside. Then turned the foot using my tailstock and a 3" vacuum chuck. Could have. Turned it with my rubber jar lid opener over my chuck but the vacuum chuck was easier