Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Something more costly than a Baldor? *LINK*

Posts

Something more costly than a Baldor? *LINK*

#1

Something more costly than a Baldor? *LINK*

Donna Banfield

I just viewed the website, www.cuttermasters.com. They have an ad in the American Woodturner, and carry CBN wheels. They also carry a grinder. Over $1300 for a grinder to mount the 8" by 1 1/4" width CBN wheels.

The video clip of the grinder in action is impressive. I thought the Baldor was the end all/be all grinder, but I think I just met it's match!?!


http://www.cuttermasters.com

Re: Something more costly than a Baldor? *LINK*

#2

Alan Zenreich

Re: Something more costly than a Baldor?

Alan Zenreich

Donna,

There are some fine toys, errrr, tools out there.

Baldors and Cuttermasters are bargains compared to my favorite sharpening tool, a 2"x72" variable speed belt grinder (with an 8" diameter wheel and/or a flat platen.) However, the belt grinders are much more flexible machines.

I am fortunate enough to own a 1.5hp Bader III, configured with a Hannes Vector Grind fixture, a SB sharpening platform and a Wolverine jig.

I've had my belt grinder for 10 years or so, but if I had to buy it new today, the configuration as I've described would be well over $3,000.

That said, it's a pleasure to grind or sharpen just about anything on this rig.

My second favorite is our JoolTool. Our 8" bench grinder is rarely used. mainly for rough shaping and general shop tasks.

CBN wheels are lovely, and great for sharpening lathe tools. But folks who make their living by removing metal and sharpening steel (e.g., stock removal knife makers) do their production work on belt grinders... for good reason!

Re: Something more costly than a Baldor? *LINK*

#3

Re: Something more costly than a Baldor?

Donna Banfield

Well now you've just gone and made me jealous! :-)

Re: Something more costly than a Baldor? *LINK*

#4

Alan Zenreich

Re: Something more costly than a Baldor?

Alan Zenreich

Come visit, any time, I like to share my toys

Re: Something more costly than a Baldor? *LINK*

#5

Bill Blasic

Re: Something more costly than a Baldor?

Bill Blasic

Donna,

I saw one close up when Lionel brought one down to Erie for the hands on with Jimmy Clewes. Very nice but $1500? And Alan $3000? I had sold a brand new Woodcraft grinder to a student during the recent lack of grinders period so he could sharpen his tools. It was months looking for a replacement. The Rikon finally came available from Woodcraft and even though I had problems with some Rikon products I needed that grinder. $139 + tax ordered on a Friday morning and it was delivered the next day just after noon. Out of the box it runs super quiet and the stones ran dead on not even a sideways wiggle. I was impressed and a week or so later they went on sale for $99 and after a call to Woodcraft they gave me $42 back. I mainly sharpen Thompson tools and the grinders are used to sharpen tools during hands on 3 times a year. I could never see spending that kind of money for a grinder even though I've been known to buy a tool or two.

Bill

Re: Something more costly than a Baldor? *LINK*

#6

Alan Zenreich

Re: Something more costly than a Baldor?

Alan Zenreich

Bill,

I originally bought my Bader for making knives. It's much like buying a lathe (powerful motor, electronic speed control, interchangeable accessories, etc.)

Little did I know that I'd get pulled into the woodturning vortex.

I use the Bader for most grinding/sharpening tasks.

Lauren smiled the other day when she watched me use it to sharpen a pencil

Re: Something more costly than a Baldor? *LINK*

#7

Steven Antonucci

It is a beast

steven antonucci

as someone who is making knives (sort of) can tell you, the right tool for the right job... I use my Craftsman belt sander upside down in a vise as a poor man's Bader. I believe that you have the ability to slow the belt down to keep the knife from heating up to glowing, which is critical to both hands and steel.

I have seen knockoffs on Youtube made from anything from welded square stock, to bolted bed rails... if I had the space, I would consider it...

S

Re: Something more costly than a Baldor? *LINK*

#8

Re: It is a beast

John lucas

I am going to build a knife grinder before too long

Re: Something more costly than a Baldor? *LINK*

#9

Re: Something more costly than a Baldor?

robo hippy

While I haven't seen it in person, that Toycen (I think that is the name they gave it) grinder looks to be a very high quality machine. Variable speed, and a DC motor. The DC motors have come a long way. I can't remember the weight, but my Baldor is 90 pounds or so. For sure the Toycen is made for the machine shops, and tolerances beyond what I will ever need. If I was to get a belt grinder, and I do want one, if Stuart Batty ever gets his Omni Grinder on the marked, that will be the one for me. It was projected to be in the $800 plus range, and looked to be able to compete with any knife grinder I ever saw. It was supposed to be available August 2 years ago........

robo hippy

Re: Something more costly than a Baldor? *LINK*

#10

Dick Hines

Re: Something more costly than a Baldor?

Dick Hines

As my grandmother used to say' "a fool and his money is soon parted". I think I will stay with my 50+ year old Packard grinder.

Re: Something more costly than a Baldor? *LINK*

#11

Re: Something more costly than a Baldor?

Donna Banfield

Alan, if I ever get south of New York City, I will take you up on that offer.

And I know that you often travel into New England on business. The next time you're in the area, please let me know. My schedule has been very difficult as of late, but that will be changing soon :-) Would love to share woodturning ideas and tips with you.

Re: Something more costly than a Baldor? *LINK*

#12

Alan Zenreich

Re: Something more costly than a Baldor?

Alan Zenreich

Donna,

It would be a pleasure... we're good at not being in the same place at the same time, eh?

By the way, I am only 15 miles northwest of midtown Manhattan, so if you come into the city, let me know.

Re: Something more costly than a Baldor? *LINK*

#13

Re: It is a beast

John Stegall

John, did you see the knife grinder James Johnson made while you were in Kerrville?