spheres done by sphereturning jig *LINK*
John Lucas
One of my friends bought the sphere turning jig at the AAW symposium and wasn't sure how to use it so she asked me to play with it. I will do a review of it after I get more experience. I'll just say this for now. I don't turn many spheres, maybe 10 to 15 over the years. I've never been able to make 2 the same size.
With this machine I made 3 that were within 3mm of exactly the same size. Each one was within 1.5mm of round. I'm sure some of that inacuracy is me and will improve when I learn the tricks of using this machine.
The Hunter cutter on the end of the shaft does a great job. I was turning punky wood that was difficult to cut cleanly with a gouge. When you tilt the cutter it left a finish I sanded with 180 grit. Interesting machine.
The machine is built extremely well. The cutter can be used flat for roughing and then tilted either left or right to use the better qualities of the Hunter cutter. 
http://www.sphereturning.com/




