Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

for John Lucas: coloring epoxy

Posts

for John Lucas: coloring epoxy

#1

for John Lucas: coloring epoxy

GaryG in MD

Hi John,

I thought I'd move our WoW discussion about coloring epoxy over here for everyone's benefit.

To bring others up to speed:

In your reply, you noted that water-based inks and dyes work OK in epoxy even though some warn not to do it. You also noted that oil-based colors will work.

You also noted that powders (like tempra and ground materials such as powdered chalk) CAN cause problems. When you say that you use "slow set", what exactly do you mean by that? I assumed that "15-minute" would be long enough to get the job done. Do you agree, or not?

Have you ever tried acrylic artists colors (paints) straight out of the tube into epoxy? Seems like that would also be a good solution.

Have you tried alcohol-based dyes? They might be too thin...

TIA, Gary

Re: for John Lucas: coloring epoxy

#2

Beth Ireland

Jorge

does or did use colored epoxy extensively, she used the slow set epoxy (overnight) and used alcohol dyes and got very good results.

Re: for John Lucas: coloring epoxy

#3

thanks Jorge...

GaryG in MD

I'm hoping I don't have to reconsider my purchase of 15-minute epoxy, but that's one of the things I hope to find out from this post. ...GG

Re: for John Lucas: coloring epoxy

#4

Re: for John Lucas: coloring epoxy

don stephan

On more than one occasion I have used 5min epoxy to file a crack, worm hole, missing small knot, et cetera - snall defects. I use "fresco" powders which I think are simply ground pigment. Almost every time I have used black powder.

Re: for John Lucas: coloring epoxy

#5

barry rockwell

Re: for John Lucas: coloring epoxy

barry rockwell

I've used colors extensively in both epoxy and cyanoacrylate glue, and whether it's 5 minute, 15 minute, or overnight epoxy, I have used Trans-Tint dyes for translucent colors and liquid epoxy pigment for opaque colors. I have done fairly large pours of epoxy, but small amounts of CA for small cracks. It tends to make the CA go off pretty quick.

Re: for John Lucas: coloring epoxy

#6

Thanks, Don...

GaryG in MD

The "Fresco" powders are usually tempera.

That's good to know.

Thanks, GG

Re: for John Lucas: coloring epoxy

#7

Thanks, Barry...

GaryG in MD

Well, that's a "duh" for me!

I hadn't looked up "epoxy pigments".

There they are! Very good to know.

Thanks, Gary

Re: for John Lucas: coloring epoxy

#8

Bill Blasic

Re: for John Lucas: coloring epoxy

Bill Blasic

When I took a class with Marilyn Campbell she used oil paint as a coloring medium. She said not to use Acrylic paint. And I believe that we used a 15 minute epoxy (working time). Worked well enough that I bought the epoxy, the pumpers, the filler and oil paints.

Bill

Re: for John Lucas: coloring epoxy

#9

Re: for John Lucas: coloring epoxy

matt overton

Marilyn Campbell uses West System epoxy with artist oils and the filler from West Systems

Re: for John Lucas: coloring epoxy

#10

Bill Blasic

Re: for John Lucas: coloring epoxy

Bill Blasic

Matt,

Exactly what I purchased.

Bill

Re: for John Lucas: coloring epoxy

#11

Bill and Matt...

GaryG in MD

Thanks for your info.

If anyone should know, it's Marilyn.

I've got lots of old tubes of oil paints laying around, so that's a good solution for me. I'm also glad to hear that the 15-minute epoxy I bought is satisfactory (as long as I'm quick enough!). Now I can play... ...GG

Re: for John Lucas: coloring epoxy

#12

Joe Fleming

Re: for John Lucas: coloring epoxy

Joe Fleming

I use TransTint powder dyes in 5 minute epoxy all the time. Works grat. No impact to curing time or strength. Joe

Re: for John Lucas: coloring epoxy

#13

Carful of the dust

Jim H

At SWAT, Marilyn said to be very carful of the dust from oil paint colored epoxy. She said that a lot of the pigments were bad stuff if inhaled. She even puts on her respirator to sweep.

Re: for John Lucas: coloring epoxy

#14

Re: for John Lucas: coloring epoxy

John lucas

Gary sorry it took so long to reply. Been in Rochester NY doing a demo. My phone is so slow. Been using water based pai tx for years with west system epoxy. No problem. I prefer using inks or dyes. I use mostly west system 5 minute or the slow set which takes over night. Marylin also said not to mix Weat System using weight. Spry but been doing that for years also with no problem

Re: for John Lucas: coloring epoxy

#15

very good point...

GaryG in MD

...and well taken!

As defacto Safety Officer in my club, I've just been harping about the dangers of wood dust and proper remediation! ...GG

Re: for John Lucas: coloring epoxy

#16

another good data point!


Re: for John Lucas: coloring epoxy

#17

thanks, John...

GaryG in MD

Hope your demo went well.

Sounds like most coloring agents will work if used thoughtfully.

So many choices! I'm not sure which one I'll try first, but I'll post the result.

...GG

Re: for John Lucas: coloring epoxy

#18

Re: for John Lucas: coloring epoxy

John lucas

Epoxies are all just a little different. Some colorants won't work with some epoxies. Always run a test. I mix epoxy in Dixie cups and Eden on formulas that I know work ill leave the leftover in the cup and check it in an hour or so to see if it hardens correctly. That verifies that my mix was accurate and whatever I put in didnt adversely affect the stuff.

I mix using digital scales. Put in part A. Weigh do the math a d add part B until it weighs what the math said. Mix in color or thickener or both and stir like crazy. That's part of why I use the slow hardener a for many things it takes time to really get a good mix.

Re: for John Lucas: coloring epoxy

#19

Jesper, Denmark

Re: for John Lucas: coloring epoxy

Jesper, Denmark

Any kind of dry powdered pigment should work OK with epoxy. I use graphite for making it black. Epoxy can be thinned with acetone or alcohol, so any dye based on alcohol would also be OK. I would be wary of water or oil based product, as I do not know how they would effect the epoxy reaction.

Be careful when selecting a thickener to control the viscosity. I used the West high density stuff once - bad idea. The resulting set epoxy was very abrasive and darn near impossible to either cut or sand.

Re: for John Lucas: coloring epoxy

#20

Re: for John Lucas: coloring epoxy

John lucas

The west system thickeners are for different purposes. They tell in their catalog which ones are softer. I use the 410 and 407 most often

Re: for John Lucas: coloring epoxy

#21

Jim Evans

Re: for John Lucas: coloring epoxy *LINK*

Jim Evans

I use Pearl Ex powders, a little goes a long way. I haven't had any problems with 5 minute epoxy.


Pearl Ex

Re: for John Lucas: coloring epoxy

#22

another good reco

GaryG in MD

Thanks, Jim. ...GG