Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Anyone have a favorite finish for Holly?

Posts

Anyone have a favorite finish for Holly?

#1

Anyone have a favorite finish for Holly?

Henry (Raleigh, NC)

I have a Holly bowl turned - subtle white and grey tones. I suspect that any of the regular oil finishes, or even shellac (SealCoat) will provide an amber tone. I will of course try a off cut before finishing the bowl. That brings to mind ol' M Dresdner's oft repeated phrase: Finish firewood first. Too often I have ignored that at my own peril.

So anyone have a favorite finish that keeps/enhances the color tone of holly (without making it appear amber)?

Henry

Re: Anyone have a favorite finish for Holly?

#2

Lacquer is the answer!


Re: Anyone have a favorite finish for Holly?

#3

Re:  what is this?

Sergio

sometimes I see Nm between asterisks. What does that refer to?

Re: Anyone have a favorite finish for Holly?

#5

Re:  means "No Message"

robo hippy

I thought it meant No More. Close enough.

robo hippy

Re: Anyone have a favorite finish for Holly?

#6

also...

GaryG in MD

If you don't like lacquer, you can also use water-based poly or a spray acrylic or just a matte fixitive. ...GG

Re: Anyone have a favorite finish for Holly?

#7

Water based poly


Re: Anyone have a favorite finish for Holly?

#9

Re: Anyone have a favorite finish for Holly?

Barbara Gill

I use a water thin water base poly. It soaks into the wood and is pretty quick drying. I knock back the fuzz with 600 grit and apply again, wiping off any that does not soak in. I sand with 600 again to knock off any shine and then wax the surface. The result is a flat finish that looks really good.

Re: Anyone have a favorite finish for Holly?

#10

Re: Anyone have a favorite finish for Holly?

tomB

You can get a great finish on holly with micro mesh sanding. It will glow.

Re: Anyone have a favorite finish for Holly?

#11

just the bare wood with nothing on it?

GaryG in MD

I would think that would be prone to getting dirty quite easily with any handling.

What's your experience, Tom? ...GG

Re: Anyone have a favorite finish for Holly?

#12

Re: just the bare wood with nothing on it?

tomB

The finish will be silky smooth, and the grain is extremely fine, so dirt can easily be wiped off. I have not made utility pieces from Holly, so don't have experience of using it as a salad bowl

Re: Anyone have a favorite finish for Holly?

#13

Understood; thanks, Tom