Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Box Elder Hollow form

Posts

Box Elder Hollow form

#1

Box Elder Hollow form 

John Lucas

This was a fun project. I have been learning to save vessel blanks and this one started to crack so I drove my Fro down through it and split it. I glued it back together with black epoxy with some spacers to give the epoxy thickness. It's been sitting like that for a year or more. I decided to turn it.

I had trouble again with the lip cracking as I turned it. Not sure what's causing that. This piece should not have had much moisture in it. I put some finish on it which I would have thought would limit the moisture release. Will have to work on that problem. It did allow me to discover another way of covering patched cracks. I wood burned around them. Burning over CA glue always leaves a nasty look so when I got finished I mixed up some brown and black paint to a very dark brown. I used a very small brush to add colored dots to the CA lines. It came out perfect.

Finish was Krylon matte finish, buffed with 4/0 steel wool and then wax applied over it. I left the the textured areas matte.

Re: Box Elder Hollow form

#2

Re: Box Elder Hollow form

Henry (Raleigh, NC)

Nice recovery John. Turned out great. These days I find myself going to a black contrast for many pieces - both turned and flatwork.

I assume Krylon is a spray can finish? Now that I have mostly sorted out my sanding protocol, my issue of the day(week?month?) becomes finishing, particularly trying to achieve a finish with at least some gloss to it.

Henry

Re: Box Elder Hollow form

#3

Re: Box Elder Hollow form

Tim

So did you use Black Epoxy or Black CA? What brand do you like?

Re: Box Elder Hollow form

#4

Re: Box Elder Hollow form

John lucas

It is black epoxy. I would never trust CA for something like that. I ca glued a couple of tooth picks to add as spacers. I mixed black ink into the epoxy