Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Kaput cpmpressor

Posts

Kaput cpmpressor

#1

Kaput cpmpressor

Jorge

My trusty 20 gal Campbell Housefeld was working last night, this morn it did trip the breaker when turned on...

Time for a new one Made in the U.S.A. totally will be a must

maybe a 40 gal or 60 gal this time.

Advice please, oil or oil less? rotary vane, etc whatever you think is best, but all build here in this country.

Gracias!

shezz in the middle of a scramble to finish as many pieces as I can, getting ready for the biggest event of my year, the Common Ground Fair...

Re: Kaput cpmpressor

#2

Re: Kaput cpmpressor

Pete in Holland, MI

Oil sump is critical for longevity, especially if it will run for long periods of time.

Oil sump machines are typically quieter too.

Re: Kaput cpmpressor

#3

I second that opinion


Re: Kaput cpmpressor

#4

Thanks Pete and Mike!

Jorge

And this time it will live in another room, it will be quieter and will not get covered with wood dust.

Re: Kaput cpmpressor

#5

Re: Kaput cpmpressor

Nick Todd

I would suggest a Quency Pump and a true 220 motor.

Re: Kaput cpmpressor

#6

Re: Kaput cpmpressor

Jim Breeden

Quincy Compressors is the way to go, made right here in the U.S. of A., Quincy, IL. I worked for a retail/wholesale business, and we were the distributors for them in the south west.

Re: Kaput cpmpressor

#7

Re: Kaput cpmpressor

Nick Todd

As with my compressor, many local companies manufacture compressors with Quency pumps. 10+ years on mine.

Re: Kaput cpmpressor

#8

Thanks Nick and Jim!

Jorge

I will look into the Quincy offerings.

Re: Kaput cpmpressor

#9

Re: Kaput cpmpressor

Vincent Welch

Jorge,

Know 60 gallon or more allows for better use of pnuematic RO Sander and other high air consumption devices. Don't short change yourself!!! Vince

Re: Kaput cpmpressor

#10

Re: Kaput cpmpressor

Jorge

Vincent

That is an important point. Thanks for bringing it up.

Re: Kaput cpmpressor

#11

Quincy *LINK*

Mark Mandell - Gone Round In New Jersey

Jorge,

Northern has good prices on Quincy compressors.

If you can swing the price of a 2-stage, you'll have cleaner air as it seriously reduces oil "carryover." You will, however, need a dedicated 220 circuit. As I remember your shop is not climate controlled, you'll need extra starting "juice" in the winter.

The 3.5 hp Q13160VQ is a single stage 60 gal that will give you 12+ cfm, and at $800 is a deal.

Remember to use synthetic compressor oil only!


Northern

Re: Kaput cpmpressor

#12

Re: Quincy

Jorge

Thanks Mark!

best price for sure...

Re: Kaput cpmpressor

#13

Just the starter capacitor?

Joe Flemng

Sounds like the starter capacitor is shot. $20 to $30 repair vs a whole new compressor. Just a thought. Joe

Re: Kaput cpmpressor

#14

Re: Kaput cpmpressor

Pete in Holland, MI

My shop is in the basement. Compressor lives in the garage. A 3/8" plastic line connects the two rooms. Doesn't take up space, and the noise is elsewhere, along with the electrical circut load.

If you run an oil sump compressor in an unheated garage in the winter time, the mineral oil can cause it to struggle during start up, often tripping breakers. I changed the sump oil to synthetic oil (Tractor Supply) and now it starts easily even at -10F. Still running strong for 5 years with the stuff !

Pete

Re: Kaput cpmpressor

#15

Re: Just the starter capacitor?

Jorge

Joe, that will be determined monday, after the fair. so if it is that, it will be fixed, but I could use a unit with a lot more storage, this one runs almost constantly when hollowing and an orbital sander would save me lots of time.

It browns out the whole house sometimes, it is an old 110 V unit, so a 220 unit will be very welcome.

Thanks for the suggestion.

Re: Kaput cpmpressor

#16

Re: Kaput cpmpressor

Jorge

Thanks Pete,

It is a 20 + years old unit, I did change the oil to synthetic oil when I bought it second hand 6 years ago. And I do change oil a couple times a year.

Re: Kaput cpmpressor

#17

Re: Just the starter capacitor?

wayne goldstein

Jorge,

The motor may have the capability to connect for 220v. Also the unloader valve may not be opening, causing the circuit breaker to trip.

If the compressor has a belt you could try removing it to see if the motor will start normally.

Wayne

Re: Kaput cpmpressor

#18

Re: Kaput cpmpressor

walta

The size of a compressors tank is not a big factor in the systems performance. A large tank acts like a fly wheel. If you are using more air than your pump can produce a big tank buys you some amount of time. Find out how many CMFs your tool uses and buy a pump that is a little larger the size of the tank will not matter.

Walta

Re: Kaput cpmpressor

#19

Re: Just the starter capacitor?

Jorge

Thanks Wayne

I'll check on that.

Re: Kaput cpmpressor

#20

Re: Kaput cpmpressor

Jorge

Walta,

That is a good piece of information!

I'll get a pump bigger than the needs of the sander.

Thank you!

Re: Kaput cpmpressor

#21

You'r being reasoned out of bigger equipment....


Re: Kaput cpmpressor

#22

I know Stu,

Jorge

But for a production turner, even at the modest scale I operate, both my compressor and vac pump are way too inadequate. I've sold more than a hundred pieces this season, and 3 shows are coming 2 very large, so a lot ,more need to be done. The business starts to have a life of it's own, so I must upgrade. Same with a respirator...