Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

light for thin wall hollowform turning

Posts

light for thin wall hollowform turning

#1

light for thin wall hollowform turning

ken chase

Been away from turning for a long time and lost info about the special light setup I've seen

demonstrated at a turning synoisuum in Arizona. The light clipped onto the hollowing gauge

and when the wall was thin enough the light filtered through the turning.

I've always used a lazer light but wish to take my turning to the next level.

Thanks

Ken

Re: light for thin wall hollowform turning

#2

Re: light for thin wall hollowform turning

John Lucas

Ken I use a tail light bulb and a 12 volt transformer. They take shock better than most other light bulbs so the lamps last longer.

Re: light for thin wall hollowform turning

#5

How to make a light for thin wall hollowform *LINK*

Doug Wolf

Here's a link to one I've made.


PDF on how to make one.

Re: light for thin wall hollowform turning

#6

Re: How to make a light for thin wall hollowform

ken chase

Thanks so much. Will this provide the same intensity of light as the one JPaul Fennel uses.

And what is the minimum size opening that will accommodate the light?

And finally....will this work with dark wood like mesquite or are there specific species

it works better with?

This is great info and I appreciate it very much.

Thanks again

Ken

Re: light for thin wall hollowform turning

#7

Re: light for thin wall hollowform turning

ken chase

Thanks much . Appreciate the help

Re: light for thin wall hollowform turning

#8

Re: Brian McEvoy light kit

ken chase

Thanks. Much appreciated

Re: light for thin wall hollowform turning

#9

Re: How to make a light for thin wall hollowform

John Lucas

Ken I don't do a lot of thin turning with a light so take this from limited experience. Dark woods don't work very well if at all. It can also be misleading if you have woods that have a lot of contrasty areas. For example lets say an area with some dark discoloration. This area can look thicker because the light doesn't transmit through it the same was. Consequently if you try to make the light even in this area you will cut through the side. (BTDT) Woods that are light and reasonably even in color work extremely well for the transmitted light method.

Re: light for thin wall hollowform turning

#10

Lyle Jamieson

I prefer the laser

Lyle Jamieson

Yes, the light method has limitations. The light shines through the end grain different then side grain, too. That's why I use the laser. I can do the thickness of a hair with the laser without all the limitations and calibrations of the light method.

Re: light for thin wall hollowform turning

#11

Re: How to make a light for thin wall hollowform

ken chase

That was really helpful and much appreciated. As I nearly always work with mesquite and prefer

dark wood I think I'll stick to the laser light.

Thanks

Re: light for thin wall hollowform turning

#12

Re: How to make a light for thin wall hollowform

Donna Banfield

Ken, Paul uses a light attached to the tool INSIDE the hollow form that he is turning. He drills holes to a specific depth on the vessel before he begins hollowing. When the light shines through those holes he knows that he has hit his depth/wall thickness. Note, the areas that he has drilled holes are areas that he already planned to carve out.

It is also much easier to hollow green wood, as that lends itself to being translucent.

Hope this helps.