i am a student of woodturning
John Lucas
I don't know how long I've been turning. I bought a shopsmith sometime around 1980. I was turning cabinet knobs on an electric drill with a sharpened screwdriver before that. Anyway my point is, I'm still learning and still have that wonder of what is next.
I enjoy learning about new grinds (even though the very first grind I ever did still works for me) It is fun learning the differences however. as many of you know I'm now experimenting with finer grits for my grinds on my gouges just to see if there is any benefit. That being said I just spent a week with John Jordan who says 60 grit is all you need. I also just spent a day with James Johnson in Texas. He is a spectacular turner and said that the saw teeth on a courser grind will give a cleaner cut on green wood. Wow, more experimenting to do.
Of course there are tons of things to do as far as projects to try. I have literally hundreds of drawings. Maybe after I get back from trimming trees and bushes at the house I have for sale I'll get to spend some time in the shop. There's still way too much to learn and I'm trying to be a good student.
Although I have to write a hundred times on the blackboard, I will not touch the edge of a sharp skew, it cuts. Maybe a dunce cap and sitting in the corner will help also. Nah, I'd just think up more projects while I'm sitting there.




