Grinding Wheels -- Line of Fire
Ric Taylor
I have read with great interest the recent postings regarding accidents and the line of fire surrounding wood on the lathe. Many good points have been made and the danger certainly deserves all the respect we can give it.
I haven't seen anyone mention grinding wheels. They are dangerous also and they also have a line of fire.
I am a retired Air Force pilot. For part of my career I flew in Air Rescue. Among the many rescue missions that I flew there were two that happened because of grinding wheels ... on ships ... far out at sea. One was 500 miles out and the other was 800 miles out.
In both cases, crewmen were standing in the line of fire of grinding wheels that exploded. In one case a chunk of the wheel was imbedded in the the crewman's forehead and the other had it imbedded in his chest.
My impression is that many turners take their grinding wheels lightly. I know from direct experience that they are very dangerous. I stand off to the side while they are spinning up, and when sharpening I try to stay off the the side as much as I can. The wheel covers are important, they were designed for a reason, to help contain any shrapnel that may occur if a wheel flies apart. I keep the covers on my wheels, even on my CBN wheel.
This is especially important with new wheels which may contain hidden cracks. But something can stress or bump up against an older wheel, again causing hidden cracks.
Be as safe as you possible can.
Ric




