Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

How is Hemlock

Posts

How is Hemlock

#1

How is Hemlock

Ray - Middletown, IN

Friend is going to have some large Hemlocks removed, any good for turning?

Ray

Re: How is Hemlock

#2

Re: How is Hemlock

Jim Breeden

As long as you don't inhale while turning. :b

Re: How is Hemlock

#3

Poison Hemlock is a flowering plant, not a tree


Re: How is Hemlock

#4

Steven Antonucci

In NJ, most are dead

steven antonucci

I dropped about 40 of them when I bought my house 18 years ago because I got tired of looking at them standing dead. They had been dead for many years from a wooly adelgid blight that killed 90%+ of the trees in the area.

I've never seen a "fresh" piece of hemlock, but I wouldn't turn the stuff I've seen. It's a conifer with large growth rings...similar to pine, but not as white... more butternut in color.

Personally, I don't think it's worth the effort to haul it into the shop.

Steve

Re: How is Hemlock

#5

Re: In NJ, most are dead

Lan Brady

I have never turned any, but have seen lots of turned Hemlock items at the Antique shows in the mountains of NC.

Once saw a 30" bowl. That must have been a big tree!

Lan

Re: How is Hemlock

#6

They thrive here in VT

Mike Foster

I have stands of them on our property. The major use of the trees around here is for timber framing. The wood does well under compression, but I question how strong it is under shear load. I have had numerous trees snap off midway in high winds. The trees can get quite large. When I lived in Sitka, the most numerous trees there were hemlock. In that temperate rain forest, the trees can get huge, easily 12' in diameter. They are not that big in my VT woods, but some may approach 6-8' in diameter. There was a different species of hemlock that grew at the top of the mountains at treeline which made for some great turning. The trees there were more like krumholz formations and grew very slowly, so the wood was much denser and smoooooth and very nice to turn.

I have numerous trees on the forest floor which I could probably haul out with my tractor, but don't. The wood is pretty useless to me. Like Steve said, it is like turning any conifer. Tears out easily, sands poorly and the final result dings by looking at it. I have too much easily obtained hardwood to justify hauling hemlock out of the woods, cutting, splitting and drying it. Much better BTU's with hardwoods.

Re: How is Hemlock

#7

Re: How is Hemlock

Ralph Lindberg

It depends. One of the "big name" turners in the PNW likes to turn nothing but old growth Hemlock (ie many, many rings, like 100 per inch)

One of the production spindle turners I know does a lot of Hemlock and/or Cedar for the outdoor posts.

Generally it takes sharp tools and a light touch.

As for burning, I burn a lot of it. But as for the BTU output, I have a chart around here that gives the BTU output per cu ft, which clearly shows dense hardwoods have more BTU per volume then softwoods, like Hemlock.

Re: How is Hemlock

#8

Kinda confirmed my suspicions

Ray - Middletown, IN

To much cherry, maple, walnut and such to mess with something like that. I will look at it but it will have to be fantastic to make me drag out the chainsaw. Thanks for the responses.

Ray

Re: How is Hemlock

#9

Brad Vietje

Good For Timber Framing... Awful for Turning!