Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Pepper mils

Posts

Pepper mils

#1

Pepper mils

Mark Paulley

Should pepper mills be made with an end grain or side grain piece of wood?

Re: Pepper mils

#2

Re: Pepper mils

Dale Miner

As to 'should', it probably doesn't make much difference. From a practical standpoint, turning and finishing will be much easier with an end grain blank.

Re: Pepper mils

#3

End Grain

Greg Haugen

End grain will be more stable and 3" by 10"-12" piece of wood will be much easier to find in endgrain orientation then facegrain. Dryness/stability matters.

Re: Pepper mils

#4

Re: End Grain

Mark Paulley

Dale and Greg,

Thanks for the help!! Need to make some 14" mills out of cherry for Christmas presents

Mark

Re: Pepper mils

#5

Mark, Check out

Greg Haugen

"Choice Woods" for kiln dried cherry. They usually have 3" thick in a variety of lengths for a reasonable price. If you're making 14" mills, you'll need a MINIMUM of 15" lengths.