Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Tool Gloat!!!

Posts

Tool Gloat!!!

#1

Tool Gloat!!!

dick gerard

My 32+ year old General 260 is wearing out. The tailstock lead screw and quill threads are so worn out that the lead screw slips in place ... doesn't catch the threads. So, while Ray Thompson is fixing that problem, I went looking for a mini lathe. At one place I used to demo, I was told they had a brandnew Delta midi lathe, variable speed, in the back room. They were planning on returning it to Delta. Well, one thing led to another, and for less than 1/2 the retail price, I took her home.

Well, I discovered that the VS didn't work. The motor was ok, but no VS. So, I carted it off to the local warranty shop and 10 days later I now have a functioning Delta midi lathe!!!

And here is a picture ...

[URL=http://s89.photobucket.com/user/bowlman_2006/media/NewLatheRsz_zps82b7d096.jpg.html][/URL]

And just in time, too! Within 1 hour of getting this beauty home, I received a phone call order (wholesale) for 20 bowls; 5 around 6 inches, oil and wax finish, 5 around 6 inches milk paint; 5 at 7+ inches oil and wax and 5 7+ inches milk paint. BUT, they want them by Friday September 6! So I must be off my rocker. Tomorrow is colonoscopy day (yippee kayeah) so today and tomorrow are "stay close to the porcelan throne days". So, Saturday thru Thursday I will be making the shavings fly!

Re: Tool Gloat!!!

#2

Re: Tool Gloat!!!

John Lucas

Dick I'm real happy with mine although I tend to use it for small stuff or traveling demos. I'll be interested in your impression as a production turner on how it functions. The one I have has the least run out of any lathe I've owned and the tailstock alignment is the same thing.

Re: Tool Gloat!!!

#3

Brad Vietje

Re: Tool Gloat!!!

Brad Vietje

Great timing and serendipity -- or is it synchronicity!

Somehow the phrase "Holy S**T!" comes to mind, but that would probably be a case of bad timing right about now... :O

Good luck with the colonoscopy; getting the bowl commission is great, but your health is the really important thing.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Tool Gloat!!!

#4

Re: Tool Gloat!!!

Mike Brazeau

Any idea what it took to repair Dick? One of our guild Deltas like this has the same problem and the controllers are Out of Stock at Delta US with no idea of when they are coming in. Am working with an independent who does Delta Warranty work in Ontario. Great little lathe when working.

Re: Tool Gloat!!!

#5

Re: Tool Gloat!!!

Peter Lamb

Dick, I truly believe better to be lucky than smart.

I love my 46-460

Well done

Re: Tool Gloat!!!

#6

Re: Tool Gloat!!!

Doug Trembath

Dick, I hope your procedure ends up costing you less than my own recent experience. Man, we had twelve people in there before it was accomplished, and the Insurance folks only paid for half of them. Guess who paid for the rest?

Best of luck and hopeful for the end :>) results...

Doug Trembath