Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Powermatic Inverter update and ?

Posts

Powermatic Inverter update and ?

#1

Tony Reynolds

Powermatic Inverter update and ?

Tony Reynolds

I figured out I had an intermittent inverter and now have a replacement in hand, (aftermarket source). I upgraded to the Delta 3hp model of the same series. Just curious if anyone knows whether PM uses the Delta inverters with all factory defaults or do they set custom parameters on some of the settings?

Hal Taylor, just encase you read this. I have responded to your emails several times and they just bounce back. So thanks for all your input.

Tony

Re: Powermatic Inverter update and ?

#2

Re: Powermatic Inverter update and ?

Hal Taylor

Tony, sorry you're not getting through. I don't think I've had an email problem - at least your first one found me.

As for the parameters - you can download the parameters from your old inverter with a program Delta provides. You will need an interface which I have. Let me know. hataylor@embarqmail.com

Re: Powermatic Inverter update and ?

#3

Tony Reynolds

Back in business!

Tony Reynolds

I got the new inverter installed today. The 3hp version is much larger than the 2hp so I had to drill and tap new mounting holes. Also had to file down the motor bracket at the hinge point so it didn't interfere with the inverter when loosening the belt.

Read the manual and figured out the parameters that needed programmed so the front panel controls would work. Before doing that, I learned how to run the lathe with just the keypad on the inverter. I have to say the keypad method is pretty nice. If the inverter was on the front of the lathe I'd just use that. The degree of control on the speed adjustment is pretty sweet. It maybe just me but it seems that this newer model of the Delta inverters is much smoother at lower speeds than the older version.

I may over time play with the ramp up and braking times to fit my style of use, but all in all I'm very pleased. Now back to work to make up for lost time creating inventory for the next show at the end of the September.

Just encase someone is looking to buy a new inverter I got mine from Charles Gumm at AutomatedPT.com and was very pleased with the service I received. No affiliation, just a happy customer.

Thanks for everyone's input.

Tony