success!
GaryG in MD
Like many of you, I'm sure, I regret the inevitable loss of the beautiful red coloration in box elder as it ages (mostly by exposure to UV) to brown.
I've read people here (was it Jamie, perhaps?) saying to add artificial color by air brushing. I don't have the "stuff" to air brush (in either the literal or figurative senses), so today I sought an alternative. I made a pen with box elder (and black Ti) that I absolutely had to keep the red in.
I considered water colors, but I didn't really want to use water, and I figured that if I dry brushed it, I couldn't blend the colors to get the desired result. Looking through my art drawer, I found a set of 36 Grumbacher oil pastels (about 40 years old) still in excellent condition. (Don't you just love it when you keep stuff, and it stands the test of time? But that's meat for another thread for Charlie or Steve to run with...). Most finishes work over oils, so that sounds like a good solution to me.
I've always been impressed with how pastels can be blended to achieve any color desired. So I started playing around on some scrap (or skip the 's') box elder bits to see if I could accomplish a match for the red color. Yes! I could. Just three colors. But would it end up looking real? I'm picky, and if it looked fake, I just couldn't do it. Well, nothing ventured..., as they say.
I carefully drew very light, spaced lines of the darkest color, a deep, very slightly bluish red, onto the pen body over the real color, taking great care to stay "in the lines". I went over the area, first with an ocher light orange, and then with a white. Then I blended it well with a pointed, rolled-paper blending stick, and carefully wiped off any excess with a tissue. Hey, not bad. A good match. Just a little more intense than the real deal, but that's good -- it makes a nice statement on a pen. And it seems to be sticking really well. I don't know if it's a "permanent" color, but it will certainly last a LOT longer than the red wood!
Will it stand the test of my pen finish? I use the new Stick Fast CA kit. I absolutely LOVE it. I fought with pen finishes and was losing the battle till I found this. It really works perfectly. No yellowing (upon which I absolutely insist), very quick and easy, and can leave a satin or gloss finish, as desired. The first "seal" coat is a specially formulated 'thin' CA. I put it over the pastels with the lathe on, and there was no problem -- no running or spreading or movement of the color. It just locked in under the CA. Yes! Love it. [Unfortunately, the photo is still on my camera, so for now, you'll just have to take my word for it. But I will post it soon.] (Note to self...)
So if you want to keep your box elder red permanently, just follow the above instructions. Here's my recipe. The three Grumbacher colors I used are
1) (a deep red) "22-10",
2) (a light orangy ocher) "22-3", and
3) (white) "22-1)
As I say, these pastels are probably 40 years old, and Grumbacher was bought out by Prismacolor, so I can't say if they use the same numbering system these days. You can sometimes get the originals on eBay. But even if they're not the identical numbers, my descriptions above should get you off to a good start anyway.
I am very enthusiastic about this. I have beat Mother Nature on this one!
...GG
I am anxiously waiting to see a picture.




