Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Need SuperNova chuck key

Posts

Need SuperNova chuck key

#1

Need SuperNova chuck key

Joe Donohue

I apologize if this is posted twice. I thought I posted it several hours ago.

My woodturning club has 2 of the original SuperNova chucks (the ones with the pivoting handle). The handles (chuck keys) are nowhere to be found after a move to a new facility.

Does anyone either have one that they will part with or know where I can get at least one? I have tried the nova web site, left a message on the Service Center desk, checked ebay but no luck. It does not appear that any other chuck key will fit.

Any help would be appreciated.

Thanks,

Joe Donohue

Nevada Woodchucks

by Joe Donohue

Re: Need SuperNova chuck key

#2

8mm Allen Wrench

Doc Green

An 8mm Allen (hex) wrench fits my SuperNova2. Find one with a T handle and you should be in business.

Re: Need SuperNova chuck key

#3

Re: 8mm Allen Wrench

Joe Donohue

Actually, this is before the Supernova II. It uses a worm gear type turning mechanism similar to the oneway, not a hex. The gear head on the handle has sort of a universal joint mechanism.

I appreciate the response though.

Re: Need SuperNova chuck key

#4

Re: Need SuperNova chuck key

Don Evans

I assume you are talking about the one's that had a gear pivoting head? I believe there were also 2 type of those, one had 5 (I'll call them teeth) and the other had 7. Do you know which one you need?

I'll look tomorrow and see if I have an extra I can part with but I'm not sure if mine are 5 or 7's, think they are 5's.

Will look and see.

Don

Re: Need SuperNova chuck key

#5

Re: Need SuperNova chuck key

Joe Donohue

Don, I haven't got a clue whether they were 5 or 7 teeth since both of ours are missing. But you are right about the description.

If you have a spare, we would certainly be happy to reimburse you for any expense.

Joe Donohue

Nevada Woodchucks

Re: Need SuperNova chuck key

#6

Re: Need SuperNova chuck key

Barry Irby

There used to be a fellow in West Virginia that was the service rep. He was very nice and had lots of seconds and spares. Surely someone here can remember how to find him even though he is no longer the rep. I bet he still has a few spares.

I can not Imagine that Nova will not help with this. They have a New rep and I believe they are in Florida.

I have a spare because I bought two chucks. I am reluctant to part with it, but if nothing else comes to light contact me. I have no idea how many teeth it has but I can look if you need it.

Re: Need SuperNova chuck key

#7

Re: Need SuperNova chuck key

Darryl

I think the key is what I have it has a "T" handle and gear teeth at the end. If so the NOVA part number is 48203 and is marked NOVA on the other side. Mine has 9 teeth. The old rep was Tim Geist in W VA. Bob "G" is the new one in Florida and has been very helpful to me in my problems. call him 1-866-748-3025

Re: Need SuperNova chuck key

#8

Re: Need SuperNova chuck key

Joe Donohue

OK Daryl and Barry, I called the Florida number and spoke with a very nice fellow named Phil. He said they don't have any and can't help with where I might find one.

I'll try to find Tim Geist's number in W. Virginia to follow up on Barry's suggestion. Anyone have his number?

Joe

Re: Need SuperNova chuck key

#9

Re: Need SuperNova chuck key

Darryl

Tim Geist 304 295 8166... Isn't what you are looking for just a big -hugh - chuck key? Maybe some company that makes drill presses or similar thing could lead you in the correct direction??? If the person you spoke to Phil is who I am thinking about he would know . He is the marketing manager for Tekantool in the U. S I think... Darryl

Re: Need SuperNova chuck key

#10

chuck key

Darryl

Northern Tool has chuck keys but only up to 1/2" I miced the one I have and if it is the correct one it is about 22mm or almost 7/8". Maybe Enco or Mc Masters or Harbor freight???Darryl

Re: Need SuperNova chuck key

#11

Re:  chuck key

Darryl

I found this sizing chart form "bing" http://www.bing.com/images/search?q=Chuck+Key+Size+Chart&qpvt=Chuck+Key+Size+Chart&FORM=IGRE

Re: Need SuperNova chuck key

#12

Re:  chuck key

Joe Donohue

Good idea. I'll mic one of the chucks tomorrow when I'm at the clubhouse.

thanks

Joe

Re: Need SuperNova chuck key

#13

re tim giest

bob davis

tim was very helpful to me hen he was rep. new setup continues to be lousy try tim...tvgeistmfg@aol.com..this could possibly still be his email

Re: Need SuperNova chuck key

#14

Bill Blasic

Re: re tim giest

Bill Blasic

That T-handled chuck is one of the rarest things on earth. Chuck is useless without that keyed wrench. I looked for one several years ago without any luck. It would be great if someone found a substitute.

Bill

Re: Need SuperNova chuck key

#15

Re: re tim giest

Joe Donohue

Yes. Tim Geist returned my call this morning and verified the fact that there was no way to get an appropriate key for the Supernova (first model). He said that they went out of production some time ago and the supply of those keys ran out some time after that. He couldn't think of an alternative source.

Thank you all for your input and help. It looks like the club will be purchasing new chucks. I suppose we could offer these for sale to someone who already has a SuperNova key.

Joe Donohue

Re: Need SuperNova chuck key

#16

Re: re tim giest

Nick Todd

Joe, You know as soon as you sell the chucks, the keys will show up. I would be interested in buy the chucks without the keys. If you like email me with the specifcs & what insert will the come with.

THanks......

Nick

Re: Need SuperNova chuck key

#17

Re: re tim giest

Lan Brady

Consider buying a used one (with a key) from ebay. Tie a long string to it so that it is hard to loose. You will probably find the lost keys once you stop looking for them.

Good Luck, Lan

Re: Need SuperNova chuck key

#18

Ellis Walentine

The word from Teknatool

Ellis Walentine

I sent a note to Anthea at Teknatool with a link to this discussion, and here is what she had to say. If you want to follow up with her, let me know and I'll forward your inquiry to her.

Ellis Walentine, Host

I am assuming as its very old/original chucks, that we won't have any pinions to assist this club, but I will ask one of our guys here to check on it and advise me. Alternatively, we would be happy to supply replacement chucks to upgrade the clubs stock at a special discounted price - for instance we often have damaged boxes (where the product is fine but may have a scratch or the box may be damaged) which we could supply to the club, if they want to contact us we can arrange a quote.

Re: Need SuperNova chuck key

#19

Re:  chuck key

Joe Johnson

I have a 2003 vintage Supernova w/accessories that is practically new. It includes the chuck, chuck key, 25mm jaw set, 50mm jaw set, 1-1/4" x 8 tpi insert, 1" x 8 tpi insert, woodworm screw. I believe it has the swivel chuck key that you described. Unfortunately I don't have a spare chuck key I can send you, but I would consider selling the whole thing for a reasonable price. If you have an interest, send me a private e-mail at johnsoj8a@stx.rr.com.

Re: Need SuperNova chuck key

#20

Re: Need SuperNova chuck key

Don Evans

Sorry Joe, I got busy and just got around to checking on this, the one's I have are 7 teeth. Apparently, based on another posters reply there were 7 and 9 teeth, NOT 5 and 7 as I stated earlier.

Anyway, the ones I have are the 7 teeth type. I think these were first one's out after the tommy bar chucks.

Attached is a photo of one I modified to use in drill when moving jaws large diameter to small or vise versa. Made similiar addapter for changing jaws, did final snugging by hand.

Don

Re: Need SuperNova chuck key

#21

Re: The word from Teknatool

Joe Donohue

Ellis, thanks for the offer. Yes, please send her my info.

Joe

Re: Need SuperNova chuck key

#22

Bruce Raymond

Re: Need SuperNova chuck key *LINK*

Bruce Raymond

I'm in need of a seven tooth key for my SuperNova Chuck


Need a SuperNova Key

Re: Need SuperNova chuck key

#23

Re: Need SuperNova chuck key

Nick Todd

Bruce,

If your interested in SuperNova chuck key, I have a couple extra. Send me a PM and I'll send you a price.

Re: Need SuperNova chuck key

#24

Bruce Raymond

Re: Need SuperNova chuck key

Bruce Raymond

Nick

Raymond322@chartermi.net

send me an email please.

Bruce