Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Remote Switch - Success

Posts

Remote Switch - Success

#1

Remote Switch - Success

Steve Criscenzo

I used Doc Green's "little yellow wire" method to add a remote switch for my PM 3520. I found a low cost motor switch at Amazon. I like it because of the large stop bar. I could not mount the switch on my tailstock as Doc shows due to tilt away for the tailstock. Instead, I drilled and tapped two 10x32 holes in the base and attached an outdoor outlet box. Works like a champ.

Thanks Doc!


Re: Remote Switch - Success

#2

Switch Envy

Doc Green

Good deal, Steve! I'm glad it worked.

Your switch is a little bigger than the ones I used. Now I have switch envy!

~Doc

Re: Remote Switch - Success

#3

Rob Wallace

Re: Switch Envy

Rob Wallace

It's not how big the switch is, it's how you use it that matters.....

;^)

Rob

Re: Remote Switch - Success

#4

Re: Remote Switch - Success


Re: Remote Switch - Success

#5

Re: Remote Switch - Success

paul grover(sc.)

IS THERE A WIREING DIAGRAM AVALIABLE TO WIRE THE SWITCH USING THE YELLOW WIRE?

Re: Remote Switch - Success

#6

Re: Remote Switch - Success

Steve Criscenzo

Go to Doc Green's we site and it is in the recent article section.

Steve

Re: Remote Switch - Success

#7

Link to the article *LINK*

Doc Green

Shows how to install a remote switch on a PM 3520.

http://www.docgreenwoodturner.com/remswitch.html


Home Page