Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

McNaughton Core Saver

Posts

McNaughton Core Saver

#1

McNaughton Core Saver

Don in Central Illinois

Just purchased the standard, while on sale. Came yesterday and I noticed that the tool post is 1" and my Vega takes a 1 1/4" post. Didn't see anywhere when ordering to tell them I need a 1 1/4" post. Is there a bushing or something that I need to purchase? Any help greatly appreciated.

Re: McNaughton Core Saver

#2

Re: McNaughton Core Saver

robo hippy

I know that they are made. You should check the place where you got it. Craft Supplies would be a most likely place to start.

robo hippy

Re: McNaughton Core Saver

#3

Re: McNaughton Core Saver

Greg Haugen

Contact Craft Supplies, even though the system is not from them, in my opinion they are the "go-to", they do have extra posts in different sizes and lengths. Personally, due to the torque and stress I would not trust a bushing or anything. Start with Craft Supplies and see what they say first.

Re: McNaughton Core Saver

#4

Re: McNaughton Core Saver

Dale Bonertz

Contact Christian at http://www.woodworkersemporium.com/. I purchased a sleeve from him for my 33mm post on my vicmarc. I am sure he can get a 1 1/4". There are holes in the sleeve so you tighten the post through one of the holes.

Re: McNaughton Core Saver

#5

Re: McNaughton Core Saver

Don in Central Illinois

Thanks, I'll try them.

Re: McNaughton Core Saver

#6

Harry Robinette

Re: McNaughton Core Saver

Harry Robinette

I tried the sleeve thing but just didn't like it,luckily I have a metal lathe and made my own for my Vega. If you know someone with a metal lathe there easy to make.

Re: McNaughton Core Saver

#7

Re: McNaughton Core Saver

Don in Central Illinois

I've thought about taking the original post to a machine shop and have one made. Still checking out some vendors.

Re: McNaughton Core Saver

#8

Re: McNaughton Core Saver

Don in Central Illinois

Well Woodcraft and Craft Supplies only have 1" posts, so it's off to find a local machine shop and have one made.

Re: McNaughton Core Saver

#9

Re: McNaughton Core Saver

Nissan Teman

Try Lee Valley. Different size posts are available from them on special order.

Re: McNaughton Core Saver

#10

Re: McNaughton Core Saver

Don in Central Illinois

Already found a local machinist who will make one for about $50. It will be ready when I get back from vacation.