Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Metal spinning tools

Posts

Metal spinning tools

#1

Jim Barbour

Metal spinning tools

Jim Barbour

Does anyone know of a good source for metal spinning tools to use on a wood lathe? I have need to turn out some goblets with metal cups and thought spinning the cups would be more interesting than simply buying them. I have searched the site and found several conversations from years past on exactly this topic, but the links and such seem to be to companies and sites no longer in existence or, as in the case of Sorby, the don't seem to make spinning tools any more.

Re: Metal spinning tools

#2

Re: Metal spinning tools

Curt Stivison

I believe Penn State Industry sales metal spinning tools.

Re: Metal spinning tools

#3

Re: Metal spinning tools

Dale Miner

pennstateind.com/mm5/merchant.mvc?Screen=PROD&Store_Code=PS&Product_Code=MSTCOMBO&Category_Code=metal-spinning-tools

I've not used or even seen this tool, but here is a link to the Penn State tool.

Re: Metal spinning tools

#4

Re: Metal spinning tools

John lucas

I believe sorby still sells some but I haven't looked for them lately I am plannin on building my own. I started a few years ago but got sidetracked

Re: Metal spinning tools

#5

Micheal Mocho class

John Lucas

If you really want to learn spinning I would highly recommend a class. There are a lot of little tricks that someone who has done it can teach you. I'm still looking into the possibility of taking it myself.

It is at the marc adams school of woodworking in November. I couldn't save the link on this computer.

Re: Metal spinning tools

#7

Re: Metal spinning tools

John Peck

Lots of info about metal spinning and tools at: www.metalspinningworkshop.com

Re: Metal spinning tools

#8

Jim Barbour

Re: Metal spinning tools

Jim Barbour

Thanks everyone. I would love to take Mocho's class but it is at the same time as the NC Symposium and I probably should show up for my rotations :b I had the great fun of taking a class from Michael and Mark St Leger at Arrowmont several years past and highly recommend either of them.