Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

General 260 quill

Posts

General 260 quill

#1

General 260 quill

Hugh

I have stripped the thread on the quill and screw on my General 26020, my local general dealer in Hamilton On says there are no quills in stock at General, anyone know where i might find one?

Re: General 260 quill

#2

Re: General 260 quill *LINK*

Mike Brazeau

I am sure there was a thread on this topic recently, possibly at CWW but can't find it. I think the jist was that it was not hardened and they took it to a machine shop and had it rethreaded. Did you try contact Normand in Cambridge or General directly. I have Peter Kennedy's contact info, Sales Manager for Eastern NA for General. Normand found bed inserts recently when no one else had them. Last resort, put a 20" Oneway Tailstock on it.


The Joy of Wood

Re: General 260 quill

#3

Re: General 260 quill

Hugh

i will try Normand, General says 4-6 weeks, they have to make the quill, I was thinking of getting the screw and have an insert machined.

Re: General 260 quill

#4

Harry Robinette

Re: General 260 quill

Harry Robinette

Mike

I would appreciate the info on where to get the General bed inserts.

woodspinner@neo.rr.com

Thanks Harry

Re: General 260 quill

#5

Re: General 260 quill

dick gerard

Can you give me the contact info for Peter kennedy? I have the exact same problem. Mine are not stripped, but after 30 years the threads inside the quill are just gone!

Re: General 260 quill

#6

Re: General 260 quill

Mike Brazeau

Dick - I was talking with Hugh the other day about something else and he mentioned that he came up with a machine shop solution. General can supply the parts but there is a lead time. Will look up Peter's info when I boot up our desktop and email it to you.

Re: General 260 quill

#7

Re: General 260 quill

Hugh Widdup

i was told there was a 6-8 week lead time, they have tailstocks complete but i was not able to find out if they could take them apart to send the quill. if you have a machine shop close by, what i had done was bore out the thread to approx 3/4", then press fit in a bar, they then welded the end to be sure it was held in place, drill and tap 1/2-13 left hand thread, mine is as good as new, only a week in but so far so good