Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Turning speed

Posts

Turning speed

#1

Turning speed

Seth poorman

Hey Guys just wanted to know if there is a better speed for wood that keeps blowing out?

Re: Turning speed

#2

Need more information, Please...

John Kaner

Photos help. What are you turning? What speed?

How experienced are you?

Re: Turning speed

#3

Re: Turning speed *LINK*

John Lucas

If your talking about tearout it's not the wood or the speed. It's how sharp the tool is, whether it's scraping or cutting, and if your forcing the too to cut. You can get a clean cut in most woods at rediculously slow speeds. I get clean cuts on my spring pole lathe that only turns about 50rpm or less.

Scraping cuts generally produce more tearout than shearing cuts. Forcing a dull tool to cut also produces tearout. Use a sharp tool while rubbing the bevel in a shearing cut and then relax and let the tool do the cutting, don't force it. You should get good results.

Here is a video showing a good shearing cut.


http://www.youtube.com/watch?v=lfZsH-Xprtg

Re: Turning speed

#4

Maybe


Re: Turning speed

#5

Re: Turning speed

robo hippy

I am not sure what you mean by blowing out. If it is tear out, a very rough surface, that is from dull tools, and/or scraping cuts rather than shear/slicing cuts. If your bowls are blowing up, then it is a tool catch, and that is a technique problem, not a speed problem. Roll the tool on its side rather than having flutes straight up.

robo hippy

Re: Turning speed

#6

Re: Turning speedYou are not supposed to set it on

Terry Scott

You are not supposed to set it on fire to turn it

Sorry couldn't help myself

John has given some good advise

Ill just add get yourself some wet timer and practice rubbing the bevel with a sharp tool

If you are using any of the scraper systems you will always get tear out