If you can't visualize IT, can you make IT?
charlie belden
You've probably mounted a chunk of wood on your lathe and started turning with only a vague idea of what you wanted to turn, or maybe even no idea at all of where you were going with it. Sometimes the end results surprise you - in a good way. But more often than not it goes the other way.
You've probably mounted a chunk of wood on your lathe, and with a pretty good idea of what you want to turn, start making the chips fly. Then, on the way to the piece you had in mind, you see something in the wood or about the shape you're seeing or both that changes your mind. The original design gets modified or completely changed and sometimes you end up with a nicer piece than you had in mind - or not.
Then there's the type of piece that pretty much requires that you have a very clear idea of what it should look like and how it must be turned - a winged vessel, a lidded box with a "pop fit" maybe a christmas ornament with finial and icicle.
Wingin' It can be a lot of fun and can sometimes serendipitously result in surprisingly nice pieces. But when you have worked out a design really well before selecting the wood for it or getting to the lathe - you're more apt to end up with a nice piece.
Do YOU have a vague idea for a piece, but don't have the tools to work it out and visualize it in sufficient detail to be able to refine it enough to actually turn it?
The key to success seems to be a Vision Thing, having a pretty clear idea for a piece and being able to visualize the end result you're after.
With single axis turning, it's fairly easy to visualize the design for a plate, bowl, vase or hollow form. You can draw half of the profile on a piece of paper and visualize the other half or actually draw it as well. With a mental image of what you want to turn, you can recognize what the turned piece should look like as you turn it. And you can make templates of the inside and outside profiles to make checking how close your turning is to what you'd designed - as you turn it. Of course, most of us make adjustments on the fly, seeing opportunities for changes as the piece is being turned. Once you have turned a piece you like, the piece can be the model for doing another one, or a dozen more - because you can see the original piece as you're turning a copy or a variation of the original piece.
If you then choose to pierce or pyro or carve the turned piece you usually pencil the pattern directly on the piece so you can SEE the idea on the actual piece and make adjustments to the layout. When you can see what you're after you can start carving, piercing, texturing, or pyroing. Of course you could just jump right in and fly by the seat of your pants - but that's risky. That can lead to accidental discoveries - but . . .
The key to the whole thing is to be able to VISUALIZE ideas, choose the one you like and work out, mentally /visually, how to get there. Then all that's left is the turning, piercing or carving or texturing or pyroing ; )
Now some folks are able to visualize an idea soley in their head - no need to do a drawing, no need for templates - they just see it - very clearly. Fewer can use that mental image of the idea and work out how to make it. Fewer still can actually make it - as the idea was originally visualized.
But when you get into ideas for pieces that require turning on multiple axes (axes being the plural of axis - as in on more than one axis), or pieces that require cutting up a piece or pieces and re-assembling their parts (think Walking Bowl) - things get a bit trickier to visualize, let alone work out how to turn them. And if you can't visualize where you want to go and how you're going to get there - it's hard to get there. 2D design tools just aren't adequate for designing and working out how to actually turn these types of pieces - at least not for me.
The lathe is a sculpting tool with a single axis constraint. The wood, on the other hand has no constraints on how it can be sculpted. It can be sequentially turned on any number of axes - as Escoulen, Weidman and Dill repeatedly show us. WE KNOW it's possible to go way beyond the "round" of Round & Brown. It's the limitations of the design tools that has been limiting what's "turnable" on the lathe - for most of us.
Now Barbara Dill's articles and demonstrations of a structured approach to multi-axis / multiple axes turning has gone a long ways to the understanding of What Does What - axes and outcomes possible using them. With Parallel Axes You Can Do THIS, with Crossing Axes You Can Do THAT, with Intersecting Axes You Can Do These. But even if you understand the fundamental concepts, it's still difficult to apply them because it's difficult to visualize the outcome of a piece turned on multiple axes. And if you can't visualize the outcome - it's very hard to get the outcome you think you want.
But now we're starting to get visualization tools that go way beyond pencil and paper, or even clay models.
There ARE 3D design tools available now (Google's FREE SketchUp, Wolfram's Mathematica being two I'm aware of and familiar with) that can be used to create virtual 3D models of objects - to scale. And there are now "affordable" (if you can spend $2K on one) 3D printers that will "print" ACTUAL 3D objects from a Virtual 3D object's data. Both the 3D design tools and 3D printers do have learning curves that must be climbed before they can be used well, but there are YouTube and other sources for video tutorials that can flatten the learning curve considerably. Easier to learn and use 3D apps are coming and 3D printers with more capabilities at lower prices are coming as well. Won't be too long before we'll be able to visualize things we can't now, and hold them in our hand(s).
The Visualization Dam is leaking and when the dam breaks there'll be a floor of new types of turnings. We have hints of what's coming, but only a few are turning them - now.



