Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Does bleach damage the wood surface?

Posts

Does bleach damage the wood surface?

#1

Aage Rendalen

Does bleach damage the wood surface?

Aage Rendalen

I have experimented with two-component bleach on holly and maple to see if I could get rid of blotches that blighted the wood. While not giving me a 100 percent good result, I was impressed with the whitening effect, but I was also a bit in doubt about the 'wooley' surface that resulted. The ambrosia bowl lost its luster, and while I can still see the ripple pattern, it doesn't stand out.

My dad used to work at a farmers' co-op in Norway in the 60s and he says that caustic soda (stage 1 of the bleaching process) was used by farmers to break down the cellulose of grain stalks so that it could be fed to the cattle. I imagine that means that it will do the same to the outer layer of wood fibers in bowls, as well. What has your experience been?

Re: Does bleach damage the wood surface?

#2

Joe Fleming

Re: Does bleach damage the wood surface?

Joe Fleming

Aage, The wooly surface is simply that you are raising the grain. Before I bleach, I sand the surface to the desired grit, then wet the surface with water by wiping it with a soggy paper towel. Let it thoroughly dry, then you sand it with the final grit again. After it dries, then you can do your bleaching with very little raised grain (wooly) effect.

Joe Fleming - San Diego

Re: Does bleach damage the wood surface?

#3

Re: Does bleach damage the wood surface?

John lucas

Ditto what joe said. Bleach can be a funny animal. It will sometimes not bleach the areas you want. Sometimes it wii change wood I. Unpredictable ways. For example I bleached Osage orange with multiple coats and it turned bar wood gray. On box elder it will bleach the white wood bot not the red I've had very moved results with hilly. Usually it does not change the the green or blue S stain much but will lighten the whiite

Re: Does bleach damage the wood surface?

#4

Code Breaking

Mark Mandell - Gone Round In New Jersey

"moved" = "mixed"?

"hilly" = "holly"?

(or are you speakit in tongues dese dace? :D )

Re: Does bleach damage the wood surface?

#5

Can't type on an Iphone


Re: Does bleach damage the wood surface?

#6

Yer nOy Alome

Mark Mandell - Gone Round In New Jersey

:D

Re: Does bleach damage the wood surface?

#7

Betty Scarpino

Re: Does bleach damage the wood surface?

Betty Scarpino

Bleach does change the nature of the surface quality of wood and repeated bleachings can damage thin endgrain areas, actually causing the wood to crack when more than three coats are applied ... in some cases. Osage orange can take twenty bleachings and be fine and the result is a lovely grey/white color.

I wouldn't say the wood was "damaged" as much as it's "changed." I like the change.

To compensate for the change in the wood's look and feel, try polishing the surface with a cloth to regain some luster. Or, finish with wax, and then buff lightly with a cloth. Just be aware, though, that applying wax over bleach potentially has it's own set of problems down the road: If there is a scratch or ding that needs repairing, it's nearly impossible to match colors and the entire piece needs to be refinished. Ask me how I know that! ....

Re: Does bleach damage the wood surface?

#8

Few Notes

Mark Mandell - Gone Round In New Jersey

As Betty mentioned, bleaching is very much a surface thing; the bleached layer of wood will be quite thin and easily sanded (or scratched) through to the darker wood underneath.

Bleach, especially the 2-part type, is very caustic and can mess with the chemistry of finishes to be applied. You should, therefore, neutralize the pH of the bleached surface with a application of household white vinegar and water (1:1 mix) to bring the surface back to an inert state. This is especially true if you plan to color your piece with dyes.

Re: Does bleach damage the wood surface?

#9

Betty Scarpino

Re: Few Notes

Betty Scarpino

Mark, I no longer neutralize after bleaching. I used to do so faithfully, but have come to realize it doesn't seem to be necessary. I've finished bleached pieces with various oil finishes as well as lacquer with no problem. I've also dyed over bleach: When I want an intense yellow, for instance, I bleach the wood, then dye it yellow.

The bleach is, however, still active unless you neutralize (but that doesn't seem to be a problem with finishes or dyes). I discovered that years ago when I passed around a bleached plate, only to get it back with cheese-doddle finger prints around the edge (or whatever the guys ate for lunch). After the plate sat in a very hot, humid place for a week, then having it dry out the next week, all the fingerprints were gone, and I'd done nothing to the plate. (There was no finish over the bleach.)

But, then, maybe in twenty years all my work will disintegrate, leaving the owners wondering what the heck happened .... :O

Re: Does bleach damage the wood surface?

#10

Chemistry

Mark Mandell - Gone Round In New Jersey

Hi Betty,

As manufacturers continue to play with finish chemistry to meet the ever-increasing demands for VOC compliant hi-performance finishes, I think a pH neutral surface is becoming more important, especially with the more complex products in the waterborne finish lines. Doesn't take much to do it, and I prefer the tight control over variables when finishing. The small blue maple burl urns I did were done twice, bleached, then dyed, bleached again, and then dyed again before being finished with waterborne lacquer. A fussy finish to be sure, but the result was a 2-level color that was exactly what I wanted.