Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Good week & bad day

Posts

Good week & bad day

#1

Dan Jechura

Good week & bad day

Dan Jechura

Got back from my vacation one week early so I went out in the shop to practice more bowl turning. Something must have clicked. Gouge sharp enough, hold the gouge right, maybe tongue at the correct spot in my mouth. I do not know but I finished turning 8 of the bowls that where laying around the shop, over the next 5 days. These are the best I have ever turned, the finish is smooth enough I could start with 320 sand paper and they are uniform thickness to 1/4 inch. So I thought why not. I got out a fresh green ambrosia maple blank and turned it down to finish thickness, !/4. I was thinking to turn it thin and let it dry and if it moved so what. It turned out great. So of course I had to try it again to make sure I had it down pat. The next green ambrosia maple went well up until that last cleanup cut and it lost a chunk. It looks clean and smooth, but missing a piece. O' well Tonight is another night.

Dan J.

Re: Good week & bad day

#2

Some might say good week, Typical Day


Re: Good week & bad day

#3

Re: Some might say good week, Typical Day

gimpy

Hey there, it sounds like you have been busy,

Would you mind showing us a few photo's

Re: Good week & bad day

#4

Brad Vietje

90% Perfect with a 10% Learning Curve  = Great!!!


Re: Good week & bad day

#5

Dan Jechura

Re: Some might say good week, Typical Day

Dan Jechura

I'll take some tonight.

Dan j.