Clean work shop joke
Terry Scott
The title above has a double meaning
To all my mates that have been ribbing me (or as we say in NZ taking the Mickey) for some time about the state of my workshop this story is for you.
On Saturday afternoon I took a one on one lesson and before the student arrived who I new to be quite Ocd (I didn't want him to have a heart attack before I started teaching)
I had a major clean up for 3 hours. Even to the extent of blowing the place out with the Garden vac.
Yes I was feeling quite light headed by the time I got everything ship shape.
The lesson went well except I couldn't find half the dammed gear you see it is normally on the floor or in untidy heaps. As you walk into my workshop there is a sign “Organized people are just to lazy to look for things “
I said at the end of the lesson leave the mess (what little there was) but no he had to clean up. I was slowly getting used to not picking up my feet about 6 inches off the floor between each step.man a clean level floor can be dangerous.
So Sunday morning at sparrow fart I went into my nice clean shop and spent a pleasure able 8 or nine hours working on a piece of Queen ebony that I was planning on entering into Kawerau.
I was summoned to go out in the afternoon to a family do or I may have finished it by midnight
Leaving the very thin winged vessel in an elaborate jamb chuck (I just got back to it tonight being Friday)
I proceeded to take it out of the jamb chuck needing 4 sets of hands, one to hold the heat gun to release the hot melt glue one to hold the work piece one to hold the wooden lever I was using to prise the work away from the jamb chuck and glue and one to hold my big head as this was going to be a stunner.
Next yes the thing went flying through the air hit the concrete floor and smashed no blew/exploded into many many many pieces.
I don't often cuss but I hope all your ears were burning.
If Id of had the normal 3 feet of shavings behind the lathe this wouldn't of happened
In fact I was so p***4d I went out and put back the shavings from the trailer load waiting to be dumped.
You will never ever ever see my concrete floor again.
Not to worry I have another piece of Ebony and tomorrow I plan on getting back on my horse .Hopefully this one won’t take as long as the first as it took a bit of planning.
Just as well I was only half way through finishing the piece
Yes I am laughing still as S*&* happens
My feet get tired so I have rubber matts everywhere on the floor. That way even when my shop is clean the floor is covered. Of course that doesn't stop me from dropping a piece and hitting the lathe bed and putting a dent in it. Did that yesterday. Fortunately water swelled the dent back out and I was able to sand it clean.





