routed bowls
John Lucas
I'm doing a demo for a club in Athens, GA next Monday. I've sold most of my routed pieces so I needed to make some more to show some of the things that can be done with the router.
The bowl went great. The hollow vessel fought me. The wood had a much larger defect than I thought. I cut down to see how deep it went and decided I couldn't even use that section so I cut it down to about 3" tall. my plans for running some routing down the side of the vessel vanished. I decided to route the top instead.
Unfortunately as I hollowed the bottom 1/3 some wood blew out the side. Apparently it had a weak area. I blew up a ballon inside to act as a dam and then filled the defect with colored and thickened epoxy. Then sanded it back down flush and it came out well enough for this project. Usually I'll add additional color to the epoxy areas to make them look more like a natural element in the wood. 







