Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Teaching Artist - suggestions

Posts

Teaching Artist - suggestions

#1

Teaching Artist - suggestions

Chip in Plano

I'm looking for suggestions woodturning instructors who do on personal/small groups. I am bored with my work and have time/money will travel. So I'm looking for a spark. I have had great classes with Jimmy Clewes, Al Stirt and Binh Pho. SWAT is in a month so that should be interesting.

I am interested in hearing other's positive experiences with artists. I don't want this post to cater to bashing other turners. I've been turning for about 7 yrs so my skill is fairly advanced. I can envision far more than I can execute. I lean more towards artistic turning.

Re: Teaching Artist - suggestions

#2

Re: Teaching Artist - suggestions

Steve Mushinski

Chip,

In what direction are you looking to study.

There are so many wonderful turners that can help you get the oven cooking but only you can decide what direction that needs to take.

With the turners you have listed you have the basis to make just about anything. If you are stuck and need a kick, that is something very hard to suggest as you need to mesh with the instructor.

A couple who are outstanding and completely different in their work and teachings:

Clay Foster

Michael Hosaluk

Either one of these gentleman will get something out of you that you did not know was there. I must stress to find that you have to mesh with the instructor for you to find it within yourself.

Enjoy searching - Steve

Re: Teaching Artist - suggestions

#3

Alan Zenreich

Re: Teaching Artist - suggestions

Alan Zenreich

A few years ago, Lauren and I booked Bill Grumbine for a full day session at his shop in PA. Well worth the time.

Re: Teaching Artist - suggestions

#4

George Taylor

Re: Teaching Artist - suggestions *LINK*

George Taylor

I had a "happy" accident in 2011 when my Arrowmont class with Ray Key was cancelled and I had to select another; I chose a class with Nick Agar and it opened up the use of color and texture to me. His Arrowmont class was earlier in the summer but he still has one in Provo (Craft Supplies) in October. Check his web site and see if this might be a new direction.


http://www.turningintoart.com

Re: Teaching Artist - suggestions

#5

Betty Scarpino

Re: Teaching Artist - suggestions

Betty Scarpino

Check out the classes offered at Arrowmont School in Tennessee and also the ones at Anderson Ranch in Colorado. Every summer each school offers several of the more creative/artistic classes.

Look at the Collectors of Wood Art's website to find someone's work you like, then ask him or her where they might be teaching soon. www.collectorsofwoodart.com

Re: Teaching Artist - suggestions

#6

Chip, what do you want to turn????

Greg Haugen

Being you've had classes with Binh and Jimmy, I'd so you're more on the "art" and Bowl/vessel turning than spindle turning. I'd say Trent Bosch, a class at his shop or JoHannes Michelsen, at his shop. Any time you can get into a class, it's a good experience. The smaller the class, the better of an experience you'll have. Classes at turners' shops will be the smallest classes available.

Re: Teaching Artist - suggestions

#7

Re: Teaching Artist - suggestions *LINK*

clay foster

In the mean time, there's no substitute for making lots of stuff. Finding your own direction can be elusive if you pursue it too hard. Make lots of stuff and let your direction find you. And rather than take more turning instruction, you might take a metalsmithing class, or papermaking, or some other medium that can be combined with what you already know.


Finding your own voice

Re: Teaching Artist - suggestions

#8

Re: Chip, what do you want to turn????

Chip in Plano

Good question. I like hollow forms because they are a great canvas for turning a piece into art but I am not discounting the design potentials of bowls (e.g ceremonial bowls). I have a design ideas book. I would love to sit down with an artist and go thru it and pick out 2-3 pieces to execute on. The foundation for all is wood turned on a lathe then finished and embellished which could include: dyeing, pyro, carving, painting, gilding, sand blasting, liming...stone, glass, fabric, metal, leather...

That's my 'In a perfect world' answer.

Re: Teaching Artist - suggestions

#9

very interesting, clay..thanks for post


Re: Teaching Artist - suggestions

#10

If you'd only stayed in Krum...

Chip in Plano

If you'd only stayed in Krum.....but you are spot on.

Painting classes are the easiest to accommodate. I joined a local arts guild which has been a very valuable expansion of horizons almost too much. Blacksmithing...oh yeah. Also thinking about jewelry making only to learn working with metals. Been looking at metal clay firing materials at Rio Grande, too.

Looking at non-turning sessions at Arrowmont, Anderson and John C. Campbell, too.

Re: Teaching Artist - suggestions

#11

Re: Teaching Artist - suggestions

Molly Winton

I like Betty's suggestion too. Look to someone's work/skill you really like, and then contact them to see if they do private tutoring. Since I was going to be all the way across the country when I went to Tampa I contacted Dixie Biggs (who lives in Florida) and asked whether she did any private tutoring. As luck would have it, she did, and was available just prior to the symposium. I had the most wonderful two days of instruction! I'm still reeling with ideas.

Re: Teaching Artist - suggestions

#12

Re: Teaching Artist - suggestions

John Lucas

If your looking to go more in the artistic direction look at Dixie Biggs, Micheal Hosaluk, Marilyn Campbell, Binh Pho, Betty Scarpino, Clay Foster, J Paul Fennel, Gosh the list just keeps going.

I believe Clay said it best and I've heard the same thing from John Jordan. Just get out there and make stuff. You'll find the direction you want to go. It doesn't hurt to get some hands on to learn some of the more interesting techniques like carving, piercing, texturing etc. However those are just tools to help you reach an end. what most of us need is a direction to go. The tools can be learned.

I've been reading more books on creativity and art in general to see where my work might go.

Re: Teaching Artist - suggestions

#13

Re: Teaching Artist - suggestions

Dave Long

Have you looked into Canyon Studios (www.canyonstudios.org) which is near you in the Dallas area. There are several name turners which come there each year to work with the small classes including Don Derry, Stephen Hatcher and Doug Fisher. Gene Colley runs the operation.

Re: Teaching Artist - suggestions

#14

Steven Antonucci

Curing boredom

steven antonucci

If you can envision things that you cannot make, why not try and fail? I'd rather spend my time figuring things out than have someone hand it to me any day? I will personally never take another class (woodturning at least) as long as I live.

I may take metal, pottery, print or fiber just to get some basics down quickly... or get access to equipment that I don't have. If you have 7 years and are competent at a lathe, save your money and start googling to find things that interest you.

And then have fun figuring out how to incorporate them into what you want to do.

Steve

Re: Teaching Artist - suggestions

#15

Re: Teaching Artist - suggestions

RCH

The linked discussion was interesting. Based on personal experience, the most important advice was:

"You need to make stuff. Artists who put in regular working hours find their voice. Work itself generates clarity and direction. It's like invention--one thing leads to another."

Some of my work which has gotten the more favorable comments are the results of exploring an idea in multiple iterations. Interesting results have emerged -- recognizably derived from the initial idea but more successful.

Re: Teaching Artist - suggestions

#16

Re: Curing boredom

gary clarke

You might want to look into segmented turning. There is enough in this segment of turning to keep you interested for years and do something new almost weekly and still not do it all. My 2 cents.

Re: Teaching Artist - suggestions

#17

Keith Tompkins

Re: Teaching Artist - suggestions

Keith Tompkins

HI Chip, I think if you study the work of the many top artisans in any field, you'll discover a common thread; that's the ability to incorporate their interests and life experiences into their work, resulting in a "signature" style. Sure, many have studied with others as they progressed, but eventually chose their own path, based on their own influences. I've always said that if artists from other fields become interested in woodturning, and brought with them their influences, there would be an explosion of creativity, and I think that's happening. So, My suggestion would be to look within, find what really excites you, and let your work reflect that.