Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

HOLLOW FORM

Posts

HOLLOW FORM

#1

HOLLOW FORM

KEN HAINES

EXACTLY WHAT CONSTITUTES A HOLLOW FORM?

IS IT THE DIAMETER OF THE OPENING IN RELATION TO THE MAX. WIDTH?

Re: HOLLOW FORM

#2

Joe Fleming

Re: HOLLOW FORM

Joe Fleming

Ken,

I don't think I've ever seen a formal definition. Mostly, I know it when I see it. Although this is very subjective, let me suggest that a hollow form requires making with a hollowing tool rather than a bowl gouge. Of course this definition is based upon the skill of the operator.

Years ago, I took a class with Jimmy Clewes and he challenged me to make a closed bowl with only gouges. The vessel was about 9" in diameter and the opening was about 4". The height was between 5" and 6". That took a lot of different bowl grinds to make all the inside curves.

Maybe a better definition would be how the vessel is related to a bowl. We all know what a bowl is and how it functions. When a closed bowl quits serving the function of a bowl and starts just being a container, then that is a hollow form.

Joe

Re: HOLLOW FORM

#3

Brad Vietje

Re: HOLLOW FORM

Brad Vietje

I like to start with classic bowl proportions, with the foot being close to 1/3 the diameter of the piece. If opening is at the widest part, it is an open bowl; if the opening is narrower than the widest part, its a closed form bowl. If the opening is smaller than the foot (roughly 1/3 diameter), its probably a hollow form.

So, what' a vase? A bottle?

Safe spinning,

Brad Vietje

Newbury, VT

Re: HOLLOW FORM

#4

If

Mark Mandell - Gone Round In New Jersey

it looks like a jar, it might be a "hollowform".

If it looks like a bottle, is hollow, but has holes and voids so it can't hold anything but air, it's definitely a "hollowform", but remember, that's pronounced with clenched teeth and one slightly raised eyebrow. :D

Re: HOLLOW FORM

#5

Joe Fleming

Re: We need a committee.............

Joe Fleming

We need an AAW committee to develop a formal definition. Then, they need to circulate USA definition around the world to other woodturning bodies to gain international recognition.

OK - maybe not. :)

Re: HOLLOW FORM

#6

barry rockwell

Re: HOLLOW FORM

barry rockwell

Hi Ken,

The best description I have ever seen said that if the inside of the form cannot be cut with a gouge while riding the bevel. it is a hollow form. Can't remember who said it but it makes sense to me.

Re: HOLLOW FORM

#7

Jesper, Denmark

Re: How about.........

Jesper, Denmark

If you can see what you are doing inside, then it's a bowl. If not, it's a hollow form :D

Re: HOLLOW FORM

#8

Re: We need a committee.............

Don in Central Illinois

Joe, remember that a camel is nothing but a horse builtbr committee.

Re: HOLLOW FORM

#9

Re: We need a committee.............

Don in Central Illinois

Joe, remember that a camel is nothing but a horse built by a committee.

Re: HOLLOW FORM

#10

Agree, I have said it a million times


Re: HOLLOW FORM

#11

Re: We need a committee.............

RCH

I can guarantee that it will fail. I have spent 40 years working on archaeological pottery in the Near East. I have worked closely with one colleague for more than 25 years -- we still differ on things as fundamental as definitions of "bowl" vs "pot" vs "jar". Some pieces are clearly one or another, but on some we still disagree.

Re: HOLLOW FORM

#12

Don . .

Mark Mandell - Gone Round In New Jersey

That was supposedly a committee of lawyers :D

Re: HOLLOW FORM

#13

Re: Don . .

Don in Central Illinois

That's worse than I thought.

Re: HOLLOW FORM

#14

Re:  Worse

Mark Mandell - Gone Round In New Jersey

1 hump or 2?