Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Attn. John Lucas

Posts

Attn. John Lucas

#1

Attn. John Lucas

gtwilkins

G'day John,

I was reading your post on the sphere turning jig as I am looking for one, you mentioned that it will hollow the sphere as well.

For the life of me I can't get my head wrapped around how you would do that.

Any insight on how to do it? It doesn't mention that on the web site, it does look like the best rig I have looked at.

Thanks, Trevor

Re: Attn. John Lucas

#2

Re: Attn. John Lucas *LINK*

John Lucas

I was hoping they showed it on their website. If you look at the photo on their home page the sphere turning mode is where it pivots from the bolt that is centered on the ball. In hollowing mode it pivots at the center of the upright that holds the tool.


http://www.sphereturning.com/

Re: Attn. John Lucas

#3

Re: Attn. John Lucas

Jack

John,

I'm Looking for a spindle roughing Gouge. One that has the long ears. What would you suggest.

Thanks

Jack

Re: Attn. John Lucas

#4

spindle roughing gouges *LINK*

John Lucas

Jack I'm not sure what you are looking for. I have 2. A copy of a Sorby 3/4" SRG and a Henry Taylor 1 1/4 SRG. I use the 3/4 99% of the time. I bought the big one thinking I would like it better. I don't. If you use if flat with the U up it does a pretty good job but if you use the wings at all it roll too easy.

I looked at 3 catalogs through tools too see what's available today. There are a lot of 3/4" that look similar to mine. Then I found some big ones from Crown called oversize roughing gouges that are 1 1/4 and 1 3/4. those are sold through www.Hartvilletool.com if you want to look at them.

My choice if I were buying a new SRG would either be the P@N 1" or the Thompson SRG. I don't see them on their website but he has had them at the last several symposiums I've been to. The reason i like these is they are the shape that I use but they have really thick shanks so if your a new turner there would be less chance in damaging the tool with a big catch.

Here's a video to show how I use my SRG.


https://www.youtube.com/watch?v=h8YYYYA-6jQ

Re: Attn. John Lucas

#5

Re: Attn. John Lucas

gtwilkins

G'day John,

I see it now, the jig seems to be the answer and it looks like a quality bit of kit.

Thank you, Trevor

Re: Attn. John Lucas

#6

Re: Attn. John Lucas

John Lucas

It is very well made with massive parts so it's quite heavy. Can't wait to get down to Pat's to give it a try for real. I've been collecting data on sphere turners for about a year thinking it would make a really good project me to try and build since I'm trying to learn machinist skills. This one has the features I like most, micro adjusting cutter, a Hunter style carbide tip, the ability to rotate the tip for cleaner cutting, and very solid. About the only thing missing is a more accurate way to align the jig with the intended sphere. I've seen one that has a removeable pointer that goes on the bolt that centers everything. I'm not sure how critical this really is however.

Re: Attn. John Lucas

#7

Re: spindle roughing gouges

Jack

John,

Thanks for the help.

Craft supply was closing out the P&N spindle roughing gouge 1" for $66 so I picked one up there. This way I get to make a handle too.

Jack