Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

3520b questions

Posts

3520b questions

#1

Alan Zenreich

3520b questions

Alan Zenreich

I have never turned on a Powermatic 3520, but will be using one for the first time next week in Tampa.

Photos show a black cushion on the top of the headstock. Is this easily removable?

I want to mount something magnetic to the top of the headstock, and want to know if it is easy or if I have to make some other arrangements.

Would a strong magnet work atop the headstock?

Also, what are the dimensions of the top of the headstock (in case I need to fabricate a platform)

Re: 3520b questions

#2

Re: 3520b questions

Jorge

Alan,

The rubber pad is just sitting there, no problem moving it. I don't know about a powerful magnet near electronics.

Re: 3520b questions

#3

Alan Zenreich

Re: 3520b questions

Alan Zenreich

Thanks Jorge.

Re: 3520b questions

#4

Re: 3520b questions

John Lucas

Alan I use one of the MOffet lights with the powerful magnet on the top of my 3520A. Doesn't seem to hurt the electronics.

Re: 3520b questions

#5

Alan Zenreich

Re: 3520b questions

Alan Zenreich

Thanks for the confirmation John. Any time I see the question raised, it's always followed up with anecdotal comments from people that say that magnets on headstocks is a non-issue, and that it works fine.

My magnet use is a little different from most... I am mounting, what I will just refer to as a few 'demonstrator aids'. Though depending on the existing lighting setup, I may add some LED lamps to the setup.

Re: 3520b questions

#6

Re: 3520b questions

Josh Bowman

I've had a magnetic tray on top of mine since I got the 3520b. No problems with anything.

Re: 3520b questions

#7

Alan Zenreich

Re: 3520b questions

Alan Zenreich

Another question... I would like to make a drawbar for the headstock. Can someone please measure the inside length of the spindle (from the first thread to the opening in the hand wheel. Thanks in advance.

Re: 3520b questions

#8

Re: 3520b questions

Doc Green

15.25", measured from the flat face of the handwheel to the end of the spindle on the inboard side.

Re: 3520b questions

#9

Alan Zenreich

Re: 3520b questions

Alan Zenreich

Thanks Doc... just what I needed