Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

A first!

Posts

A first!

#1

Jack Guzman from Maine

A first!

Jack Guzman from Maine

I just finished turning a bamboo style leg for a teddy bear sized windsor chair out of cherry. After some careful skew work I believe this leg is good enough for finish and I never used a single piece of sandpaper. This is a big moment for me. I've been working on technique,sharpening and lathe tuneing to get to this point.

Usually at this point I start with the finest sandpaper possible to get rid of all the rough spots then work to finer grits and then burnish with shavings. This piece is good to go as is. I am encouraged.---Jack

Re: A first!

#2

Re: A first!

Don in Central Illinois

Still looking for my first piece without sanding. Good to know someone gets to do it.

Re: A first!

#3

Great job Jack, Does that mean I know Jack 


Re: A first!

#4

Steven Antonucci

Skews me while I kiss this guy!

steven antonucci

Who knew that Jimi was a prophet?

Steve

Re: A first!

#5

Jack Guzman from Maine

Credit

Jack Guzman from Maine

Curtis Buchanan made a series of you-tube videos while building a windsor chair. The sections where he turns the legs are what motivated me to do this. He never sands his legs and they are the finest looking chair legs I've ever seen. The sharp details would be impossible with sanding.

The rest I learned here.---Jack

Re: A first!

#6

Don Leydens

Very clever, Steve!


Re: A first!

#7

Re: Credit

John Lucas

Curtiss is who I first learned the skew from. We had to turn the tenons of our legs with a spring pole lathe. Slowing the wood down like that and watching the skew cut helped me learn. Then several years later after still struggling with beads on the skew I saw George Hatfield demo. It all made sense and I went home and started turning beads.

Other than those two it's just pure practice. I remember struggling so hard to turn long thin spindles with the skew and chatter. Then one day it just came together and and I could do it. Practice practice practice.