Powered Air Respirator
Devon Palmer
So,
Just finished hosting a 2 day make-and-take pen turning fundraiser at our citywide art festival to buy turning tools for a local community workshop/maker space. Taught 60 people how to turn pens. It was outside and breezy so, I "thought" my exposure to woodust would be minimal.
Long story short, ended up with bronchitis/pneumonia 18 hours after the event - went downhill fast. Doc doesn't think it's attributed to the wood dust but, I feel that it at least overtaxed my immune system and made me susceptible. So, now I'm looking at making a serious investment in a respirator.
While I'm religious about wearing a Dust-b-gone in the shop, most of what I read says it's only good to 3 micron. Don't we want sub-micron protection?
I'm strongly considering a Trend Pro http://www.envirosafetyproducts.com/trend-airshield-pro.html but, it's shield isn't strong enough to stop anything big coming off the lathe. and it's rating is only slightly better than the Dust-b-gone for dust extraction.
On the other hand, there is the 3m Airstream that a lot of the pro's use. http://solutions.3m.com/wps/portal/3M/en_US/GovernmentSolutions/Home/ProductInformation/Online_Catalog/?PC_7_RJH9U5230GO250IANS2O1A3I71000000_nid=GSLW6DNZZBgsBDJ9W3LTVRglGSKBBSD5FPbl
It's faceshield is strong, it's a hardhat and it's hepa/sub-micron filtering media. But at almost $1000 (almost 3x the price of the Trend pro) and a crappy NiCad battery (wish they'd move on to Li-ion), I'm not sure the benefit is there for the greater cost.
I'm perfectly happy with my dust-b-gone, but, at a 1000-1500 hours a year turning, I'm starting to get sensitive to cherry, walnut - common things. I think I need to invest in something better. I don't mind investing in quality for the long haul as my health is worth it, but, just not sure what other options are out there and where to draw the line.
- Devon, Columbus Ohio



