Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

so how do you store your logs, blanks. rough outs

Posts

so how do you store your logs, blanks. rough outs

#1

so how do you store your logs, blanks. rough outs

Darrin Hill

im just curious...

I cut logs, seal ends with anchor seal, and usually have to leave them piled outside in the weather, so i get to see which ones didnt cracks months down the road...

if im really industrious i'll cut a blank out and seal more and put it in my shop, and cracking is a lot less.. but i have room for a couple of salad bowls under my sink.. otherwise space is precious.. ie dont have a lot of room..

i have a leaf pile by the shop that has a lot of rotting (spalting) elm buried inside..

i also have a couple of storage bins ( empty cat litter boxes) full of shavings and an odd bowl or two..

but thats pretty much my method... was wondering if people keep anything in their garage, bedroom, outhouse, under a tree, in the open, etc..... how much (if any) are sealed, with what, etc..

Re: so how do you store your logs, blanks. rough outs

#2

Re: so how do you store your logs, blanks. rough o

Jeff Rich

I cut wood into lengths that are fairly easy to handle by Cheri or myself, usually about 2 feet in length. I store them outside stacked like a regular wood pile and cut as needed. I do use AnchorSeal and store in the storage shed if I want to save as much as possible, example would be a special piece of wood. I usually seal all my bowl rough outs and toss them in the storage shed. We used to use AnchorSeal on everything! Mainly to keep the neighbors from taking the wood for bonfires. We didnt use our wood as fast a few years ago.

Re: so how do you store your logs, blanks. rough outs

#3

Steven Antonucci

not too different

steven antonucci

Logs are mostly in lengths, not sealed...just cut off the checking... and then split the checked ends for firewood.

Very few "blanks", as I turn most of what I prep right away to not have to seal it.

roughouts go in lawn bags to dry. I have 3 or 4 bags full of bowls, rarely lose one. No sealing here either.

I have a shelf outside near where I cut that gets the shorter logs and crotches. Those I will typically process into "blanks" and seal ends, since they aren't long enough to cut away checking and still yield what I picked them up to do.

Steve

Re: so how do you store your logs, blanks. rough outs

#4

Re: so how do you store your logs, blanks. rough o

Roger Chandler

Room to store blanks is a BIG issue for me. My shop is a 14" x20" utility shed, and it has a full complimented woodworking shop in it, and 2 lathes. Most of my wood is stacked outside in log form and sealed on the ends with anchorseal.......most of it is cracked however.

Funny you brought this up today......early this morning I was in the shop making a finial......my wife came out to the shop and just looked at what I was doing and looked around the very crowded shop.......no comment from her........I looked at the shop and at her and said.......I need a bigger place to work! I took her out and showed her the problem I have not having enough wood storage for processing blanks, rough turning, etc.........

She said maybe some day.........I will be glad when that day arrives!

Re: so how do you store your logs, blanks. rough outs

#5

Re: so how do you store your logs, blanks. rough o

John Lucas

I've been experimenting a lot in the last 8 or 10 years because I can't always turn as much as I like and I can easily get wood. Most often more than I can use.

My experience based on Tenn. weather. The sun, the wind, and ground are your enemies. The sun and wind cause rapid and uneven drying which leads to checking. The ground helps bring in the bugs.

In my own situation the ground problems isn't going to be solved. I do get bugs but on the plus side I also get some spalting. I simply don't have a way to get them off the ground. I tried putting them on cinder blocks. Didn't really seem to reduce the bugs enough for the effort.

Sealing the ends with Anchor seal and covering them with a tarp has proven to the best and least hassle. When I first get the logs home if they are short I set them on one end. this seems to reduce the bug problem some and the ground effectively seals that end. Then I cover them with a plastic bag. the bags will deteriorate within a few weeks but it gives me time to anchorseal them at a more convenient time.

the cheap blue tarps only last about 6 to 9 months or so before they start to tear up. I did find some UV inhibitor tarps from TEK supply but I"ve lost that link so if you want some call them. They sent me a list and the prices were very reasonable.

If I notice a log really starting to check I cut it up. Take it to the bandsaw and cut past the checks to get whatever size I can save. Usually spindle stock but if you catch it early enough you can get some smaller vessels and bowls.

If I can I will cut some of the fresh logs into bowl or vessel blanks and seal the end grain with paraffin wax. On woods that I really really want to save I will seal the entire piece with wax. I have saved some wood in this state for 2 years in my shop. If I only wax the ends it might start checking after 6 months or so but it depends so much on where it's stored. Spindle stock will dry quite successfully with the ends sealed with wax and stored on my shop floor.

Re: so how do you store your logs, blanks. rough outs

#6

Dick Hines

Re: so how do you store your logs, blanks. rough o

Dick Hines

Most of the wood I get is in log from. I have the wood guy put in the shade. I then cut blanks and rough turn the wood as fast as I can. All roughed out pieces are soaked in denatured alcohol before wrapping and store in a cool dark place in the shop.

Re: so how do you store your logs, blanks. rough outs

#7

barry rockwell

Re: so how do you store your logs, blanks. rough o

barry rockwell

Darrin and others, I guess I am luckier than most because I have the room to store almost anything I want. I am fortunate to have a 28 x 32 shop that is JUST my shop, about half of which is usually full of logs and timber waiting to be processed. One 28' wall is wood slat racks full of blanks of all sizes and woods, all sealed due to Montana's extremely dry climate. I usually try to rough out and seal timber asap because otherwise it will soon only be good for pen blanks. After roughing out bowls and platter blanks, I thoroughly seal them and put them in the "bowl room" in my basement, where there are usually 200 to 300 bowl and platter blanks of all sizes waiting to be turned. I lose very few pieces to cracking, except for apple which always cracks. I also have a 28 x 16 metal equipment shed with lots of wood storage, and a 15 x 20 dirt floor old log tack shed with pallets on the floor for more timber storage. It will be a long time before I actually NEED any more wood, but like the rest of you, I just can't help myself.

Re: so how do you store your logs, blanks. rough outs

#8

Re: so how do you store your logs, blanks. rough o

Greg Haugen

As the logs come, they are cut and processed. Bowl wood is roughed/cored, sealed, and placed in the kiln. If it isn't ideal bowl wood, they're cut to square sizes of various lengths, and then turned into cylinders. End grain sealed and stored in the shop or if there's space in the kiln, I'll use them as humidity buffers. Cylinders will be used for anything from handles, ornament globes, or the larger ones will be used for end grain hollow forms.