Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Woodfast M408h

Posts

Woodfast M408h

#1

Woodfast M408h

Nick Lyon

I just got a Woodfast M408h from a woodturner who passed away. The thing is a solid lathe. Problem is that when I was turning a couple days ago, it stopped working. I don't have the owner's manual for it or any other information. I can't find anything on the internet besides a guy who scanned the manual as the smallest JPEGS I've ever seen. If anyone could help me, that would be great.

Re: Woodfast M408h

#2

Re: Woodfast M408h

Doug Turner

Nick, I have the manual for the M408S, but it doesn't discuss the electronics on the variable speed motor. There is a fuse, which I hope you checked. Woodcraft Supplies USA originally sold these, and they had a staff member that would upgrade to variable speed. There phone number is 1-800-551-8876.

I have had mine since that late 1980's and it still runs like the day it was made. I really like it.

Re: Woodfast M408h

#3

Re: Woodfast M408h

Nick Lyon

Hey, Doug, thanks for responding. I would check the fuse if I knew where it was. Can you give me some insight?

Re: Woodfast M408h

#4

Re: Woodfast M408h

Doug Turner

The fuse is on the speed control. You should have power light, an on-off toggle switch, a dial speed control and a fuse. You have to twist the fuse to the left to remove it. My email address is if you need more help off line.

Re: Woodfast M408h

#5

Re: Woodfast M408h

Don Orr

On some systems you need to unplug the lathe, wait a couple of minutes and plug it back in the reset the contoller.

Good luck and hope you're back up and running soon.

Re: Woodfast M408h

#6

Re: Woodfast M408h

Nick Lyon

I wish it was that easy. I've had it unplugged for several days just to try that out. Still doesn't work. I'm hoping I can make some sense out of this soon.

Re: Woodfast M408h

#7

Don in central washington

Re: Woodfast M408h

don in central washington

Roger is the senior lathe man for woodcraft supply in utah

you can get him thru the 800 nr. they are wonderful in service with me over the years.