Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Avoidance - Fear of Commitment

Posts

Avoidance - Fear of Commitment

#1

Avoidance - Fear of Commitment

charlie belden

Avoidance – Fear of Commitment

I tend to lean towards Wild Hare ideas for pieces. How I’ll make the piece, or even if the piece can be made, I don’t worry about. Figure that’ll come later when it’s needed. Most of the time it does.

But sometimes there’s a point, usually near the end of making a piece, where there’s a Pass or Fail, Make or Break, literally break, point. Do things right and it all works. Make any mistake, even what seems like a little mistake, and it’s Do Over Time. And the time involved may be an hour, or a couple of days worth of work, spread over a week or so.

When I hit one of those Make It or Break It points, I get into Avoidance Mode, cleaning up the shop, reading a book, checking out some sites on the web, playing with SketchUp to start on another idea – even doing the dishes. This can go on for days or weeks.

Fear of Commitment,. Apparently it’s a Guy Thing, or so I’m told by several women friends. We may drive fast and do other dangerous things that involve a lot of risk, but these are impulsive things. Stuff we take the time to really think about – well that’s were insecurity and self doubt enter into things.

I Can

I Can

I Think I Can

But . . .

Maybe I ought to Sleep On It, take a break, get away from it for a while, go for a ride, - do the dishes first.

When YOU hit a Make Or Break Point, how do YOU get through it? Do things work out or not – more often than not? If things don’t work out, do you Get Back On The Horse - or move on to another idea?

Re: Avoidance - Fear of Commitment

#2

A Lack of Vision

Mark Mandell - Gone Round In New Jersey

It's one thing to think of the piece. Another to figure out the "how?" Still another to actually make it.

The first two phases require only hypothetical thinking, the third requires vision. "What will this thing look like from all directions?" All too often we give in to our 2-D thinking, induced and embedded in our brains by books, drawings, and screens ranging from TV to computers to drive-in movies.

Once you move the idea from the 2-D sketch pad to the wood (or clay or stone, etm) your vision must account for and encompass the full 360° globe of possible viewpoints. If you discover a problem, especially one that leads to a "block" to completing the piece, it is most likely caused by a lack or loss of vision of what the piece is supposed to look like. This is what artists' shelves and closets are for. You put the piece away until your unconscious creative brain nodes have worked it out and share the answer (the completed vision) with the other parts of your self.

Relax. Happens all the time. ;)

Re: Avoidance - Fear of Commitment

#3

The 'Mental Element'

mjonesrdg

The mental element of our creative endeavor has always intrigued me more than the physical techniques that are so frequently and freely demonstrated. If we had a turner's therapist, I'm sure I would be years ahead of where I am now.

As for how to get past the mental element that sticks me in my tracks, I'm with Mark Mandell (post above), I find that I get the "answer" if I am willing to put the piece away on the shelf or in the closet for awhile. It also helps if I "commit" to making a series of 3 (at least), of any new form that I am working out in my head.

Planning to make 3, with the goal of getting one "keeper", allows me the freedom to spin away....to stop and make the special jig or holder that will be useful on the next and the next......allows my mind to stay free of "nit-picking" as I go, and helps keep my mind in an "abundance" mode. I have lots and lots of wood....and I'll find that there is more of it where that came from.

Now, about those gals that say their guys are unable to "commit".... :b

Re: Avoidance - Fear of Commitment

#4

Ellis Walentine

Guided by an old saying

Ellis Walentine

About 40 years ago, I happened to be listening to John Gambling, on WOR-710AM radio in New York. His guest was a Brit whose name escapes me, but whose words I will never forget:

If you get to it, and you can't do it, there you jolly well are, aren't you?

Can't put it much more succinctly than that. It's all up to you.

Ellis

Re: Avoidance - Fear of Commitment

#5

Succinctly British

Mark Mandell - Gone Round In New Jersey

"Let it be"

:D

Re: Avoidance - Fear of Commitment

#6

Re: Avoidance - Fear of Commitment

Chip in Plano

Interesting thread Charlie with lots of insight. I have these moments often. I turn myself into situations where I cannot achieve my goal or I change my design mid-stream but didn't think it through enough or I simply lack the courage in my skill/talent/artistry to pull off my vision. What do I do? Typically, I leave the piece in the chuck until I figure it out. Taking out of the chuck is always an option but I try to resist because the piece rarely goes back in exactly the same way. Taking a piece out is a sign of personal failure although most pieces do make it back onto the lathe and get completed. Case in point, my first HF took 4yrs to complete because of catches, broken tenons, etc. I can remember at least 4 separate times I mounted the piece on the lathe only be returned to my Someday shelf. But I love the piece because it made me a better turner.

I have 2 pieces sitting in chucks now. One piece, I should never have started turning as it was ill conceived so I will finish it this week and put it in a box for a gift or silent auction piece. The 2nd one is destined for an art show due in 18 days. I have the concept. I have the talent. I am not confident in my technique. So I am still marinating on it...and have been for about 90 days..LOL

I'm procrastinating but deadlines always seem to stimulate my artistic juices and my courage. It also helps that I have a back-up piece should I fail to deliver.

Re: Avoidance - Fear of Commitment

#7

Steven Antonucci

Do nothing until you get closer.

steven antonucci

Yeah, that will work!

The one thing I am certain of is that if I never do it, I'll never do it. If I try to do it, I may just get there. Giving myself permission to fail is the best thing I ever did.

Steve

Re: Avoidance - Fear of Commitment

#8

When I taught

Mark Mandell - Gone Round In New Jersey

I told my students in the first class meeting that the only sure way to fail my course was not to try.

I also made up a sign that was the first thing my students would see coming into the classroom. That sign read

IT'S BETTER TO BE CLEARLY WRONG THAN UNCLEARLY MAYBE

By the end of the semester they all understood it, and were empowered for it.

Re: Avoidance - Fear of Commitment

#9

Re: Art & Fear

Chip in Plano

This is a good read.

http://www.amazon.com/Art-Fear-Observations-Rewards-Artmaking/dp/0961454733/ref=sr_1_1?ie=UTF8&qid=1368639220&sr=8-1&keywords=Art+%26+Fear