Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Embellishments

Posts

Embellishments

#1

Embellishments

Don in Central Illinois

I want to add some metal leaves to one of my turnings. My question is, is there any particular metal to use or stay away from. I'm thinking copper but I may want to paint them. Do I have to do anything before I apply paint? Best way to cut copper? Lot's of questions and after hearing some of your answers, it will probably bring more questions. As always, thanks in advance for your help.

Re: Embellishments

#2

Re: Embellishments

Craig Daymon

No personal help here, but there is an article on inlaying silver (and other metals) in the latest issue of Woodturning Design. That's solid metal.

Are you planning on solid or to use metal dust?

-Craig

Re: Embellishments

#3

Re: Embellishments

Don in Central Illinois

Actually, I want the metal/painted leaves glued to a painting of the flower stem on the turning.

Re: Embellishments

#4

Re: Embellishments

David Walser

Don - I suggest you consider using metal leaf. Metal leaf (very thin foil sheets) comes in many varieties -- copper, silver, aluminum, brass, gold, etc. The process is fairly simple: You apply sizing (adhesive) to the area you want to leaf. Lay the leaf over the area and daub with a soft bristle brush. The daubing pushes the leaf onto the surface, conforming the metal to the intricate details of the item being leafed. Once you're satisfied with the way the item looks and you've cleared away any excess metal, cover the item with a top coat of lacquer of some other finish.

HTH

Re: Embellishments

#5

Re: Embellishments

Dick Coers

Copper will cost more than steel, but you are able to add patina to the copper. I would use a scroll saw for smooth cuts, maybe sandwiched between 1/8" hardboard for really clean edges. If you want a more sculptured look, consider precious metal clay. It's copper powder in a clay form. Sculpt the clay, then bake it. You can bake it over a form for contoured shape as well. It will also take patina. It also comes in silver, gold, and bronze. I think the bronze is trickier to bake, and of course since you are buying real gold, it's really pricey!

Re: Embellishments

#6

Re: Embellishments

Don in Central Illinois

That clay sounds like something I could use, especially since my daughter works in polymar clay. Where can I purchase this?

Re: Embellishments

#7

Re: Embellishments *LINK*

Dick Coers

I don't know of a local suppliers, but here is an online source.


Rio Grande, PMC

Re: Embellishments

#8

Leo Cuellar

Re: Embellishments *LINK*

Leo Cuellar

Don. here is a link to a book on copper work that you can download for free. It is older but the information is still valid. It will help you decide if it is something you want to add to your repertoire. Tools for chasing & shaping can be made out of all different kinds of things, old screwdrivers, odd bits of tool steel, that old set of carving tools that would never hold an edge, nails...


copper work

Re: Embellishments

#9

Re: Embellishments  LINK

Steve Kniffen

Don,

Craft Supply carries a product called Rub 'n Buff Metallic Finish. I have not used it, but the info on it looks like it might do what you're looking for. Here's a link to the product that's closest to copper: http://www.woodturnerscatalog.com/p/3/-/11/51/-/4711/Rub%2527n-Buff-Metallic-Finish

Re: Embellishments

#10

Re: Embellishments

Don in Central Illinois

Thanks all. I think I have enough info. Now if I can get this out of my mind and onto a turning like I envision. If it works, photos to follow.