Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Delta midi mods

Posts

Delta midi mods

#1

Delta midi mods

John Lucas

I've been wanting to add some modifications to my Delta Midi for traveling. I liked the way Mark StLeger did his old Jet mini so I kind of added that to my lathe. I put a tool tray out to one side so I don't have to turn my back to the audience looking for tools. I put a tailstock storage shelf on to get it out of the way. I put a second shelf on the bottom to hold Drill chucks, etc. I added 2" angle iron to the bottom to support the rolling locking wheels and I added a Vacuum chuck adaptor the handwheel. I also added a 1 1/4" sleeve over the 1" threaded spindle so my lathe is now 1/1/4 x 8 TPI and will use all my powermatic accessories.

the stand also has Quick release knobs that only take 1/2 turn to tighten and loosen. This way I can take the stand apart with 6 knobs and it just takes about 30 seconds or so to put it together. The Tool shelf and tailstock shelf slide out easily. I also added an angle bracket to hold my Moffet light. I also store the magnet on the back so if I need to put the light somewhere else on the lathe I can.

Now I have to take several days off to paint 2 rooms and get ready for new carpet. I hand applied texture to the ceiling on my new dormer. That has got to be one of the most tiring and messy jobs I've ever done.








Re: Delta midi mods

#2

Re: Delta midi mods

Philip Duffy

John, Love your ideas and the pix are a big help in seeing how you approach the problems. I just bought the same lathe and have been toying with similar ideas. Thanks! Phil

Re: Delta midi mods

#3

Re: Delta midi mods

Lan Brady

The tail stock caddy is very impressive!

Re: Delta midi mods

#4

Re: Delta midi mods

H. Phillip Medghalchi

John, whr did u attach the tool caddy & the tail stock holder?

Re: Delta midi mods

#5

Re: Delta midi mods

John Lucas

I turned the bolts that hold the lathe onto the stand upside down and installed the nuts. These stay permanantly on the stand. When I install the lathe I simply lay it on the bolts and then add 4 nuts to hold it in place. This leaves the space of a nut between the stand and the lathe. I simply slide the tailstock and tool caddy into this space and hold them in place with an allen wrench. I used 2 different sized allen wrenches. These are the ones that I might need to change tools in handles. I do try to carry those wrenches with me but if I should forget these will be backups. Now If I could just mount a spare chuck wrench somewhere because that's what I've forgotten twice. :)

Re: Delta midi mods

#6

Re: Delta midi mods

phillip medghalchi

John, I have an idea about your chuck wrench. If you go to Home depot or lowe's and get the plastic electrical cable or wire loops ( size of the dia. same as the dia. of your chuck wrench body (black, or white, open on one side and have two holes on the wings on both end that you can screw it to the surface to manage the wires or cables) then on the tail stock in the front on the body use a self tapping screw and screw it to the body. it will always be there for you no matter of you travel or use it around the shop. Always at reach.