Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Box save

Posts

Box save

#1

Box save

John Lucas

I was testing out a new threading machine this last weeks and was just using scrap to play with. This was a piece that had a 1" hole in one side about 1 1/2" deep and 3/8" hole in the other side about 1" deep. I have no idea why I had used that piece for that thought I could use it to practice threading. I parted it in the middle of the space between the 2 holes.

Then started making a box and threading it. Because the box lid was flipped the grain didn't match at all so I textured and stained it. The threads came out great despite my skepticism on the threader. I'll post more info on it later. In fact the lid fit is really really good. I've learned a lot more about threading in the last week or two and I'll try to pass that along shortly.

I need to do a photo segment on this box because it has a classic problem when shooting glossy work. Go to the photo forum and you'll see my answer.


Re: Box save

#2

Don Leydens

Re: Box save

Don Leydens

I like the texturing a lot, John. Great photo too! Gotta go to that photo page now...

Don

Re: Box save

#3

Aage Rendalen

This box has got a brain!

Aage Rendalen

Not every box has a brain. Way to go! More IQ boxes, please.

Re: Box save

#4

If I only had a brain- my theme song


Re: Box save

#5

Re: Box save

Philip Duffy

Great work, John. Can't wait for the threading sequel as this is an area that I want to pursue. Philip