Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Simple Lidded Box - Spalted Maple

Posts

Simple Lidded Box - Spalted Maple

#1

Simple Lidded Box - Spalted Maple

Roger Chandler

Clean lines and no embellishment.....let the figure in the wood speak for itself. This is 3-3/8" wide and 4-1/2" tall.


Re: Simple Lidded Box - Spalted Maple

#2

Re: Simple Lidded Box - Spalted Maple

Bernie Weishapl

I like it Roger. Nice, simple, clean lines.

Re: Simple Lidded Box - Spalted Maple

#3

Re: Simple Lidded Box - Spalted Maple

Roger Chandler

Thank you Bernie!

Re: Simple Lidded Box - Spalted Maple

#4

Re: Simple Lidded Box - Spalted Maple

John Lucas

good job. I do like the shape and the spacing of the lid. If I had any suggestions it would be to make a more visible line where the lid and bottom meet. I doubt anyone but a box maker would even notice but to me the joining surfaces look unfinished or uneven. A trick I learned from either Raffen or Chris Stot was to bevel the edges so it actually accentuates the gap. It makes them look more finished.

I do love the shape and especially the joint between the lid and knob.

Re: Simple Lidded Box - Spalted Maple

#5

Re: Simple Lidded Box - Spalted Maple

Roger Chandler

Thanks John..........I will have to try that bevel at the opening to see how it looks. Thanks for responding! :)