Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Steam Powered Box Making OT *LINK*

Posts

Steam Powered Box Making OT *LINK*

#1

Mike Stafford

Steam Powered Box Making  OT *LINK*

Mike Stafford

Mike Hunter sent me this link to a YouTube video showing a steam powered wood shop where they make boxes.

The video is very high quality and I enjoyed seeing the process. Nothing goes to waste in this operation as the sawdust and scraps feed the ever hungry boiler.

I really enjoyed seeing this and I hope you will as well.

P.S. I failed to mention that the reason I enjoyed the video so much is because it reminded me of and provided images of a similar shop that my grandfather talked about working in when he was young. It was wonderful to relive his stories vicariously while watching the video.


Steam Powered Box Mill

Re: Steam Powered Box Making OT *LINK*

#2

Mike Hunter

Re: Steam Powered Box Making  OT

Mike Hunter

Sent to me by Johnny Tolly from Texas

Re: Steam Powered Box Making OT *LINK*

#3

Excellent video


Re: Steam Powered Box Making OT *LINK*

#4

Re: Excellent video

Mike Gibson

Great video, if y'all keep putting up these videos l am never going to get out to the workshop. Michael

Re: Steam Powered Box Making OT *LINK*

#5

Quite amazing, but OSHA would go.......

JamieDonaldson

...NUTS!!! Did you notice that the dog had a stub tail around all those wheels and gears! ;)

Re: Steam Powered Box Making OT *LINK*

#6

Mike Stafford

Re: Quite amazing, but OSHA would go.......

Mike Stafford

This shop is located in California and is recognized for its commitment to being 100% Green.

I would imagine that it is visited by California authorities of some sort.

The dog probably lost its tail in some unfortunate rocking chair accident..... :b

Re: Steam Powered Box Making OT *LINK*

#7

Equally Amazing

Mark Mandell - Gone Round In New Jersey

That California EPA hasn't shut it down for the substantial amount of particulate and CO emissions coming out of that chimney.

Not exactly my idea of "green". There have to be any number of ways to recycle cellulose other than burning it.

Re: Steam Powered Box Making OT *LINK*

#8

Re: Steam Powered Box Making  OT

robo hippy

Pretty cool. A lot of heavy metal in there. Steam is probably not the best alternative, or they might be able to get a more efficient and cleaner burning system, but still cool.

robo hippy

Re: Steam Powered Box Making OT *LINK*

#9

Brad Vietje

Re: Quite amazing, but OSHA would go.......

Brad Vietje

Two Thumbs Up!

We used to have a water powered box shop about 10 miles away until the old guy died ~ 20 years ago. In later years, not so many boxes, and more barrels and tubs.

...and that was probably a beer-powered rocking chair, not steam power ;)

Safe spinning,

Brad Vietje

Newbury, VT

Re: Steam Powered Box Making OT *LINK*

#10

That was great.

Keith Newton

I have had several pieces of equipment from that era, but am down to just one, my 36" bandsaw.

Early in the video, when they were starting up, and I noticed the dog wandering in there among all those spinning wheels and belts, I cringed a little bit, then later could see how old and settled it was, then breathed a little easier. Not hard to imagine how it lost half it's tail. That would be a tough place for a puppy to enjoy the exuberance of unbounded energy.

Re: Steam Powered Box Making OT *LINK*

#11

Dick Hines

Re: That was great.

Dick Hines

They just don't make them like they used to. I hope the mill is around aanother 116 years.

My grandfather worked in a saw mill that had belts all over the place to power everything but it was not steam powered.

Re: Steam Powered Box Making OT *LINK*

#12

Re: Steam Powered Box Making  OT

Roger Chandler

Thanks Mike.......I enjoyed watching that video!

Re: Steam Powered Box Making OT *LINK*

#13

Re: Steam Powered Box Making  OT

bob davis

great! thank you mike

Re: Steam Powered Box Making OT *LINK*

#14

Re: Quite amazing, but OSHA would go.......

Steve Kniffen

Here 43 years after the creation of OSHA, we forget that mills and factories like this were the standard during the Industrial Revolution. Leather belts, open pullyies, and exposed gears were the norm. In the late 1800s and early 1900s, children greased the belts while they turned with buckets of grease and short handled mops.

In spite of modern day apologists assertions, factory owners didn't set the up just so they could injure or kill employees, they just didn't know any better. Safety science hadn't been invented yet. Personal safety was considered a personal responsibility. Technology progressed faster than hazard assessments. Factories and mills like this one fueled the industrial machine that created the modern world.

I'm going to use this video in my classes so I can show students, who don't have a sense of history, where we've come from.

Re: Steam Powered Box Making OT *LINK*

#15

Don Leydens

Re: Steam Powered Box Making  OT

Don Leydens

Very cool video. I love that kind of stuff. Wish I could stop by the shop and take a look around.

Re: Steam Powered Box Making OT *LINK*

#16

Re: Steam Powered Box Making  OT

Bill Clark

Mike, Thanks for posting this. I really enjoyed stepping back in history. Hope they continue for years.